Class MutableCallSite
MutableCallSite
is a CallSite
whose target variable
behaves like an ordinary field.
An invokedynamic
instruction linked to a MutableCallSite
delegates
all calls to the site's current target.
The dynamic invoker of a mutable call site
also delegates each call to the site's current target.
Here is an example of a mutable call site which introduces a state variable into a method handle chain.
MutableCallSite name = new MutableCallSite(MethodType.methodType(String.class)); MethodHandle MH_name = name.dynamicInvoker(); MethodType MT_str1 = MethodType.methodType(String.class); MethodHandle MH_upcase = MethodHandles.lookup() .findVirtual(String.class, "toUpperCase", MT_str1); MethodHandle worker1 = MethodHandles.filterReturnValue(MH_name, MH_upcase); name.setTarget(MethodHandles.constant(String.class, "Rocky")); assertEquals("ROCKY", (String) worker1.invokeExact()); name.setTarget(MethodHandles.constant(String.class, "Fred")); assertEquals("FRED", (String) worker1.invokeExact()); // (mutation can be continued indefinitely)
The same call site may be used in several places at once.
MethodType MT_str2 = MethodType.methodType(String.class, String.class); MethodHandle MH_cat = lookup().findVirtual(String.class, "concat", methodType(String.class, String.class)); MethodHandle MH_dear = MethodHandles.insertArguments(MH_cat, 1, ", dear?"); MethodHandle worker2 = MethodHandles.filterReturnValue(MH_name, MH_dear); assertEquals("Fred, dear?", (String) worker2.invokeExact()); name.setTarget(MethodHandles.constant(String.class, "Wilma")); assertEquals("WILMA", (String) worker1.invokeExact()); assertEquals("Wilma, dear?", (String) worker2.invokeExact());
Non-synchronization of target values: A write to a mutable call site's target does not force other threads to become aware of the updated value. Threads which do not perform suitable synchronization actions relative to the updated call site may cache the old target value and delay their use of the new target value indefinitely. (This is a normal consequence of the Java Memory Model as applied to object fields.)
The syncAll
operation provides a way to force threads
to accept a new target value, even if there is no other synchronization.
For target values which will be frequently updated, consider using a volatile call site instead.
- Since:
- 1.7
-
Constructor Summary
ConstructorDescriptionMutableCallSite
(MethodHandle target) Creates a call site object with an initial target method handle.MutableCallSite
(MethodType type) Creates a blank call site object with the given method type. -
Method Summary
Modifier and TypeMethodDescriptionfinal MethodHandle
Produces a method handle equivalent to an invokedynamic instruction which has been linked to this call site.final MethodHandle
Returns the target method of the call site, which behaves like a normal field of theMutableCallSite
.void
setTarget
(MethodHandle newTarget) Updates the target method of this call site, as a normal variable.static void
syncAll
(MutableCallSite[] sites) Performs a synchronization operation on each call site in the given array, forcing all other threads to throw away any cached values previously loaded from the target of any of the call sites.
-
Constructor Details
-
MutableCallSite
Creates a blank call site object with the given method type. The initial target is set to a method handle of the given type which will throw anIllegalStateException
if called.The type of the call site is permanently set to the given type.
Before this
CallSite
object is returned from a bootstrap method, or invoked in some other manner, it is usually provided with a more useful target method, via a call tosetTarget
.- Parameters:
type
- the method type that this call site will have- Throws:
NullPointerException
- if the proposed type is null
-
MutableCallSite
Creates a call site object with an initial target method handle. The type of the call site is permanently set to the initial target's type.- Parameters:
target
- the method handle that will be the initial target of the call site- Throws:
NullPointerException
- if the proposed target is null
-
-
Method Details
-
getTarget
Returns the target method of the call site, which behaves like a normal field of theMutableCallSite
.The interactions of
getTarget
with memory are the same as of a read from an ordinary variable, such as an array element or a non-volatile, non-final field.In particular, the current thread may choose to reuse the result of a previous read of the target from memory, and may fail to see a recent update to the target by another thread.
-
setTarget
Updates the target method of this call site, as a normal variable. The type of the new target must agree with the type of the old target.The interactions with memory are the same as of a write to an ordinary variable, such as an array element or a non-volatile, non-final field.
In particular, unrelated threads may fail to see the updated target until they perform a read from memory. Stronger guarantees can be created by putting appropriate operations into the bootstrap method and/or the target methods used at any given call site.
- Specified by:
setTarget
in classCallSite
- Parameters:
newTarget
- the new target- Throws:
NullPointerException
- if the proposed new target is nullWrongMethodTypeException
- if the proposed new target has a method type that differs from the previous target- See Also:
-
dynamicInvoker
Produces a method handle equivalent to an invokedynamic instruction which has been linked to this call site.This method is equivalent to the following code:
MethodHandle getTarget, invoker, result; getTarget = MethodHandles.publicLookup().bind(this, "getTarget", MethodType.methodType(MethodHandle.class)); invoker = MethodHandles.exactInvoker(this.type()); result = MethodHandles.foldArguments(invoker, getTarget)
- Specified by:
dynamicInvoker
in classCallSite
- Returns:
- a method handle which always invokes this call site's current target
-
syncAll
Performs a synchronization operation on each call site in the given array, forcing all other threads to throw away any cached values previously loaded from the target of any of the call sites.This operation does not reverse any calls that have already started on an old target value. (Java supports forward time travel only.)
The overall effect is to force all future readers of each call site's target to accept the most recently stored value. ("Most recently" is reckoned relative to the
syncAll
itself.) Conversely, thesyncAll
call may block until all readers have (somehow) decached all previous versions of each call site's target.To avoid race conditions, calls to
setTarget
andsyncAll
should generally be performed under some sort of mutual exclusion. Note that reader threads may observe an updated target as early as thesetTarget
call that install the value (and before thesyncAll
that confirms the value). On the other hand, reader threads may observe previous versions of the target until thesyncAll
call returns (and after thesetTarget
that attempts to convey the updated version).This operation is likely to be expensive and should be used sparingly. If possible, it should be buffered for batch processing on sets of call sites.
If
sites
contains a null element, aNullPointerException
will be raised. In this case, some non-null elements in the array may be processed before the method returns abnormally. Which elements these are (if any) is implementation-dependent.Java Memory Model details
In terms of the Java Memory Model, this operation performs a synchronization action which is comparable in effect to the writing of a volatile variable by the current thread, and an eventual volatile read by every other thread that may access one of the affected call sites.The following effects are apparent, for each individual call site
S
:- A new volatile variable
V
is created, and written by the current thread. As defined by the JMM, this write is a global synchronization event. - As is normal with thread-local ordering of write events,
every action already performed by the current thread is
taken to happen before the volatile write to
V
. (In some implementations, this means that the current thread performs a global release operation.) - Specifically, the write to the current target of
S
is taken to happen before the volatile write toV
. - The volatile write to
V
is placed (in an implementation specific manner) in the global synchronization order. - Consider an arbitrary thread
T
(other than the current thread). IfT
executes a synchronization actionA
after the volatile write toV
(in the global synchronization order), it is therefore required to see either the current target ofS
, or a later write to that target, if it executes a read on the target ofS
. (This constraint is called "synchronization-order consistency".) - The JMM specifically allows optimizing compilers to elide
reads or writes of variables that are known to be useless.
Such elided reads and writes have no effect on the happens-before
relation. Regardless of this fact, the volatile
V
will not be elided, even though its written value is indeterminate and its read value is not used.
V
were performed byT
immediately after its actionA
. In the local ordering of actions inT
, this read happens before any future read of the target ofS
. It is as if the implementation arbitrarily picked a read ofS
's target byT
, and forced a read ofV
to precede it, thereby ensuring communication of the new target value.As long as the constraints of the Java Memory Model are obeyed, implementations may delay the completion of a
syncAll
operation while other threads (T
above) continue to use previous values ofS
's target. However, implementations are (as always) encouraged to avoid livelock, and to eventually require all threads to take account of the updated target.Discussion: For performance reasons,
syncAll
is not a virtual method on a single call site, but rather applies to a set of call sites. Some implementations may incur a large fixed overhead cost for processing one or more synchronization operations, but a small incremental cost for each additional call site. In any case, this operation is likely to be costly, since other threads may have to be somehow interrupted in order to make them notice the updated target value. However, it may be observed that a single call to synchronize several sites has the same formal effect as many calls, each on just one of the sites.Implementation Note: Simple implementations of
MutableCallSite
may use a volatile variable for the target of a mutable call site. In such an implementation, thesyncAll
method can be a no-op, and yet it will conform to the JMM behavior documented above.- Parameters:
sites
- an array of call sites to be synchronized- Throws:
NullPointerException
- if thesites
array reference is null or the array contains a null
- A new volatile variable
-