makefiles/GensrcX11Wrappers.gmk
Print this page
*** 21,106 ****
# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
# or visit www.oracle.com if you need additional information or have any
# questions.
#
-
# This file is responsible for extracting the x11 native struct offsets to
! # the xawt Java library. This is done by compiling and running a native
! # binary, which dumps output to a text file. The offsets differ on 32 and 64
! # bit systems, so care must be taken here.
! # Note: Some of the more complex logic here is most likely not needed anymore.
GENSRC_X11WRAPPERS :=
GENSRC_X11WRAPPERS_TMP := $(JDK_OUTPUTDIR)/gensrc_x11wrappers
! GENSRC_X11WRAPPERS_DST := $(JDK_OUTPUTDIR)/gensrc
! GENSRC_SIZER_SRC := $(JDK_TOPDIR)/src/solaris/classes/sun/awt/X11/generator
!
! # Normal case is to generate version according to target bits
! GENSRC_SIZES := sizes.$(OPENJDK_TARGET_CPU_BITS)
ifeq ($(OPENJDK_TARGET_CPU_BITS), 64)
! ifneq ($(OPENJDK_TARGET_OS), linux)
! # On all 64-bit systems except Linux, generate both 32 and 64 bit versions
! GENSRC_SIZES := sizes.32 sizes.64
! endif
else
! ifeq ($(OPENJDK_TARGET_OS), solaris)
! # As a special case, solaris 32-bit also generates the 64-bit version
! GENSRC_SIZES := sizes.32 sizes.64
! endif
endif
! ##########################################################################################
! $(GENSRC_X11WRAPPERS_TMP)/sizer/sizer.%.c : $(GENSRC_SIZER_SRC)/xlibtypes.txt
$(ECHO) "Generating X11 wrapper ($*-bit version)"
$(MKDIR) -p $(@D)
! $(RM) $@
! $(TOOL_WRAPPERGENERATOR) $(@D) $< "sizer" $*
! $(GENSRC_X11WRAPPERS_TMP)/sizer/sizer.%.exe : $(GENSRC_X11WRAPPERS_TMP)/sizer/sizer.%.c
$(MKDIR) -p $(@D)
! $(RM) $@ $@.tmp
! (cd $(@D) && $(BUILD_CC) -m$* -o $@.tmp $< \
$(X_CFLAGS) \
$(X_LIBS) \
-I$(JDK_OUTPUTDIR)/include \
-I$(JDK_TOPDIR)/src/share/javavm/export \
-I$(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/javavm/export \
-I$(JDK_TOPDIR)//src/share/native/common \
-I$(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/native/common \
-I$(JDK_TOPDIR)/src/solaris/native/sun/awt \
-I$(JDK_TOPDIR)/src/share/native/sun/awt/debug \
-I$(JDK_TOPDIR)/src/share/native/sun/awt/image/cvutils -lc)
- $(MV) $@.tmp $@
! # Run the generated sizer binary to create the sizes text file
! $(GENSRC_X11WRAPPERS_TMP)/sizer/sizes.% : $(GENSRC_X11WRAPPERS_TMP)/sizer/sizer.%.exe
! $(MKDIR) -p $(@D)
! $(RM) $@ $@.tmp
! $< > $@.tmp
! $(MV) $@.tmp $@
!
! ifeq ($(OPENJDK_TARGET_OS)-$(OPENJDK_TARGET_CPU), solaris-x86)
! # On solaris-x86 we also need to create the 64-bit version, but we can't run a 64-bit binary
! # As a workaround, copy this from a pre-generated file.
! $(GENSRC_X11WRAPPERS_TMP)/sizer/sizes.64 : $(JDK_TOPDIR)/src/solaris/classes/sun/awt/X11/generator/sizes.64-solaris-i386
$(MKDIR) -p $(@D)
! $(RM) $@
! $(CP) $< $@
! endif
! $(GENSRC_X11WRAPPERS_DST)/_the.generated.x11 : $(foreach S,$(GENSRC_SIZES),$(GENSRC_X11WRAPPERS_TMP)/sizer/$(S))
! $(RM) $@
! $(MKDIR) -p $(@D)/sun/awt/X11
! $(TOOL_WRAPPERGENERATOR) $(@D)/sun/awt/X11 $(GENSRC_SIZER_SRC)/xlibtypes.txt "gen" $(GENSRC_X11WRAPPERS_TMP)/sizer/sizes
! ifeq ($(OPENJDK_TARGET_OS)-$(OPENJDK_TARGET_CPU), solaris-x86_64)
! # On solaris-x86_64, as a safety measure, compare the generated file with the checked-in version
! $(ECHO) COMPARING $(GENSRC_X11WRAPPERS_TMP)/sizer/sizes.64 and $(GENSRC_SIZER_SRC)/sizes.64-solaris-i386
! $(DIFF) $(GENSRC_X11WRAPPERS_TMP)/sizer/sizes.64 $(GENSRC_SIZER_SRC)/sizes.64-solaris-i386
endif
- $(TOUCH) $@
- GENSRC_X11WRAPPERS += $(GENSRC_X11WRAPPERS_DST)/_the.generated.x11
--- 21,115 ----
# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
# or visit www.oracle.com if you need additional information or have any
# questions.
#
# This file is responsible for extracting the x11 native struct offsets to
! # the xawt Java library. The tool needs to be run on the os/arch that
! # will host the final jvm, thus the tool cannot be used when cross compiling.
!
! # To enable cross compiling, the two versions of the generated offset file,
! # sizes.32 and sizes.64 are committed into the source code repository.
! # These are the once used.
! # However when not cross compiling, the offset generator tool is built and
! # run, to verify that it still generates the same sizes.32 and sizes.64.
GENSRC_X11WRAPPERS :=
+ # Put temporary c-code and executable to calculate offsets here.
+ # Also put verification offset file here as well.
GENSRC_X11WRAPPERS_TMP := $(JDK_OUTPUTDIR)/gensrc_x11wrappers
! # Put the generated Java classes used to interface X11 from awt here.
! GENSRC_X11WRAPPERS_DST := $(JDK_OUTPUTDIR)/gensrc/sun/awt/X11
! # The pre-calculated offset file are stored here:
! GENSRC_SIZER_DIR := $(JDK_TOPDIR)/src/solaris/classes/sun/awt/X11/generator
+ # Normal case is to generate only according to target bits
+ GENSRC_X11_VERSION := $(OPENJDK_TARGET_CPU_BITS)
ifeq ($(OPENJDK_TARGET_CPU_BITS), 64)
! ifneq ($(OPENJDK_TARGET_OS), linux)
! # On all 64-bit systems except Linux, generate both 32 and 64 bit versions
! GENSRC_X11_VERSION := 32 64
! endif
else
! ifeq ($(OPENJDK_TARGET_OS), solaris)
! # As a special case, solaris 32-bit also generates the 64-bit version
! GENSRC_X11_VERSION := 32 64
! endif
endif
! GENSRC_X11_SIZES_USED := $(addprefix $(GENSRC_X11WRAPPERS_TMP)/sizer.,$(GENSRC_X11_VERSION))
!
! # Copy only the sizes.* files that are actually needed. WrapperGenerator picks up any it finds from the
! # file prefix it is given so those not needed need to be hidden.
! $(GENSRC_X11WRAPPERS_TMP)/sizer.%: $(GENSRC_SIZER_DIR)/sizes.%
! $(install-file)
!
! # Run the tool on the offset files copied from the source repository to generate several Java classes
! # used in awt.
! $(JDK_OUTPUTDIR)/gensrc/_the.generated.x11 : $(GENSRC_X11_SIZES_USED)
! $(MKDIR) -p $(GENSRC_X11WRAPPERS_DST)
! $(TOOL_WRAPPERGENERATOR) $(GENSRC_X11WRAPPERS_DST) $(GENSRC_SIZER_DIR)/xlibtypes.txt "gen" $(GENSRC_X11WRAPPERS_TMP)/sizer
! $(TOUCH) $@
! GENSRC_X11WRAPPERS += $(JDK_OUTPUTDIR)/gensrc/_the.generated.x11
!
! ifeq ($(COMPILE_TYPE),native)
! # This is not a cross compile, regenerate the offset file, so that we
! # can compare it with the version in the source code repository.
!
! # Generate the C code for the program that will output the offset file.
! $(GENSRC_X11WRAPPERS_TMP)/sizer.%.c : $(GENSRC_SIZER_DIR)/xlibtypes.txt
$(ECHO) "Generating X11 wrapper ($*-bit version)"
$(MKDIR) -p $(@D)
! $(TOOL_WRAPPERGENERATOR) $(@D) $(GENSRC_SIZER_DIR)/xlibtypes.txt "sizer" $*
! # Compile the C code into an executable.
! $(GENSRC_X11WRAPPERS_TMP)/sizer.%.exe : $(GENSRC_X11WRAPPERS_TMP)/sizer.%.c
$(MKDIR) -p $(@D)
! (cd $(@D) && $(CC) -m$* -o $@ $< \
$(X_CFLAGS) \
$(X_LIBS) \
-I$(JDK_OUTPUTDIR)/include \
-I$(JDK_TOPDIR)/src/share/javavm/export \
-I$(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/javavm/export \
-I$(JDK_TOPDIR)//src/share/native/common \
-I$(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/native/common \
-I$(JDK_TOPDIR)/src/solaris/native/sun/awt \
-I$(JDK_TOPDIR)/src/share/native/sun/awt/debug \
-I$(JDK_TOPDIR)/src/share/native/sun/awt/image/cvutils -lc)
! .PRECIOUS: $(GENSRC_X11WRAPPERS_TMP)/sizer.%.exe $(GENSRC_X11WRAPPERS_TMP)/sizer.%.c
!
! # Run the executable create the offset file and check that it is identical
! # to the offset file in the source code repository.
! $(GENSRC_X11WRAPPERS_TMP)/sizes.%.verification : $(GENSRC_X11WRAPPERS_TMP)/sizer.%.exe
$(MKDIR) -p $(@D)
! $(GENSRC_X11WRAPPERS_TMP)/sizer.$*.exe > $@.tmp
! $(ECHO) Verifying $(GENSRC_X11WRAPPERS_TMP)/sizes.$*.verification.tmp to $(GENSRC_SIZER_DIR)/sizes.$*
! $(DIFF) $(GENSRC_X11WRAPPERS_TMP)/sizes.$*.verification.tmp $(GENSRC_SIZER_DIR)/sizes.$*
! mv $@.tmp $@
! GENSRC_X11WRAPPERS += $(GENSRC_X11WRAPPERS_TMP)/sizes.$(OPENJDK_TARGET_CPU_BITS).verification
endif