Paint
, Transparency
public final class LinearGradientPaint extends MultipleGradientPaint
LinearGradientPaint
class provides a way to fill
a Shape
with a linear color gradient pattern. The user
may specify two or more gradient colors, and this paint will provide an
interpolation between each color. The user also specifies start and end
points which define where in user space the color gradient should begin
and end.
The user must provide an array of floats specifying how to distribute the colors along the gradient. These values should range from 0.0 to 1.0 and act like keyframes along the gradient (they mark where the gradient should be exactly a particular color).
In the event that the user does not set the first keyframe value equal
to 0 and/or the last keyframe value equal to 1, keyframes will be created
at these positions and the first and last colors will be replicated there.
So, if a user specifies the following arrays to construct a gradient:
{Color.BLUE, Color.RED}, {.3f, .7f}this will be converted to a gradient with the following keyframes:
{Color.BLUE, Color.BLUE, Color.RED, Color.RED}, {0f, .3f, .7f, 1f}
The user may also select what action the LinearGradientPaint
object
takes when it is filling the space outside the start and end points by
setting CycleMethod
to either REFLECTION
or REPEAT
.
The distances between any two colors in any of the reflected or repeated
copies of the gradient are the same as the distance between those same two
colors between the start and end points.
Note that some minor variations in distances may occur due to sampling at
the granularity of a pixel.
If no cycle method is specified, NO_CYCLE
will be chosen by
default, which means the endpoint colors will be used to fill the
remaining area.
The colorSpace parameter allows the user to specify in which colorspace the interpolation should be performed, default sRGB or linearized RGB.
The following code demonstrates typical usage of
LinearGradientPaint
:
Point2D start = new Point2D.Float(0, 0); Point2D end = new Point2D.Float(50, 50); float[] dist = {0.0f, 0.2f, 1.0f}; Color[] colors = {Color.RED, Color.WHITE, Color.BLUE}; LinearGradientPaint p = new LinearGradientPaint(start, end, dist, colors);
This code will create a LinearGradientPaint
which interpolates
between red and white for the first 20% of the gradient and between white
and blue for the remaining 80%.
This image demonstrates the example code above for each of the three cycle methods:
Paint
,
Graphics2D.setPaint(java.awt.Paint)
MultipleGradientPaint.ColorSpaceType, MultipleGradientPaint.CycleMethod
BITMASK, OPAQUE, TRANSLUCENT
Constructor | Description |
---|---|
LinearGradientPaint(float startX,
float startY,
float endX,
float endY,
float[] fractions,
Color[] colors) |
Constructs a
LinearGradientPaint with a default
NO_CYCLE repeating method and SRGB color space. |
LinearGradientPaint(float startX,
float startY,
float endX,
float endY,
float[] fractions,
Color[] colors,
MultipleGradientPaint.CycleMethod cycleMethod) |
Constructs a
LinearGradientPaint with a default SRGB
color space. |
LinearGradientPaint(Point2D start,
Point2D end,
float[] fractions,
Color[] colors) |
Constructs a
LinearGradientPaint with a default
NO_CYCLE repeating method and SRGB color space. |
LinearGradientPaint(Point2D start,
Point2D end,
float[] fractions,
Color[] colors,
MultipleGradientPaint.CycleMethod cycleMethod) |
Constructs a
LinearGradientPaint with a default SRGB
color space. |
LinearGradientPaint(Point2D start,
Point2D end,
float[] fractions,
Color[] colors,
MultipleGradientPaint.CycleMethod cycleMethod,
MultipleGradientPaint.ColorSpaceType colorSpace,
AffineTransform gradientTransform) |
Constructs a
LinearGradientPaint . |
Modifier and Type | Method | Description |
---|---|---|
PaintContext |
createContext(ColorModel cm,
Rectangle deviceBounds,
Rectangle2D userBounds,
AffineTransform transform,
RenderingHints hints) |
Creates and returns a
PaintContext used to
generate a linear color gradient pattern. |
Point2D |
getEndPoint() |
Returns a copy of the end point of the gradient axis.
|
Point2D |
getStartPoint() |
Returns a copy of the start point of the gradient axis.
|
getColors, getColorSpace, getCycleMethod, getFractions, getTransform, getTransparency
public LinearGradientPaint(float startX, float startY, float endX, float endY, float[] fractions, Color[] colors)
LinearGradientPaint
with a default
NO_CYCLE
repeating method and SRGB
color space.startX
- the X coordinate of the gradient axis start point
in user spacestartY
- the Y coordinate of the gradient axis start point
in user spaceendX
- the X coordinate of the gradient axis end point
in user spaceendY
- the Y coordinate of the gradient axis end point
in user spacefractions
- numbers ranging from 0.0 to 1.0 specifying the
distribution of colors along the gradientcolors
- array of colors corresponding to each fractional valueNullPointerException
- if fractions
array is null,
or colors
array is null,IllegalArgumentException
- if start and end points are the same points,
or fractions.length != colors.length
,
or colors
is less than 2 in size,
or a fractions
value is less than 0.0 or greater than 1.0,
or the fractions
are not provided in strictly increasing orderpublic LinearGradientPaint(float startX, float startY, float endX, float endY, float[] fractions, Color[] colors, MultipleGradientPaint.CycleMethod cycleMethod)
LinearGradientPaint
with a default SRGB
color space.startX
- the X coordinate of the gradient axis start point
in user spacestartY
- the Y coordinate of the gradient axis start point
in user spaceendX
- the X coordinate of the gradient axis end point
in user spaceendY
- the Y coordinate of the gradient axis end point
in user spacefractions
- numbers ranging from 0.0 to 1.0 specifying the
distribution of colors along the gradientcolors
- array of colors corresponding to each fractional valuecycleMethod
- either NO_CYCLE
, REFLECT
,
or REPEAT
NullPointerException
- if fractions
array is null,
or colors
array is null,
or cycleMethod
is nullIllegalArgumentException
- if start and end points are the same points,
or fractions.length != colors.length
,
or colors
is less than 2 in size,
or a fractions
value is less than 0.0 or greater than 1.0,
or the fractions
are not provided in strictly increasing orderpublic LinearGradientPaint(Point2D start, Point2D end, float[] fractions, Color[] colors)
LinearGradientPaint
with a default
NO_CYCLE
repeating method and SRGB
color space.start
- the gradient axis start Point2D
in user spaceend
- the gradient axis end Point2D
in user spacefractions
- numbers ranging from 0.0 to 1.0 specifying the
distribution of colors along the gradientcolors
- array of colors corresponding to each fractional valueNullPointerException
- if one of the points is null,
or fractions
array is null,
or colors
array is nullIllegalArgumentException
- if start and end points are the same points,
or fractions.length != colors.length
,
or colors
is less than 2 in size,
or a fractions
value is less than 0.0 or greater than 1.0,
or the fractions
are not provided in strictly increasing orderpublic LinearGradientPaint(Point2D start, Point2D end, float[] fractions, Color[] colors, MultipleGradientPaint.CycleMethod cycleMethod)
LinearGradientPaint
with a default SRGB
color space.start
- the gradient axis start Point2D
in user spaceend
- the gradient axis end Point2D
in user spacefractions
- numbers ranging from 0.0 to 1.0 specifying the
distribution of colors along the gradientcolors
- array of colors corresponding to each fractional valuecycleMethod
- either NO_CYCLE
, REFLECT
,
or REPEAT
NullPointerException
- if one of the points is null,
or fractions
array is null,
or colors
array is null,
or cycleMethod
is nullIllegalArgumentException
- if start and end points are the same points,
or fractions.length != colors.length
,
or colors
is less than 2 in size,
or a fractions
value is less than 0.0 or greater than 1.0,
or the fractions
are not provided in strictly increasing order@ConstructorProperties({"startPoint","endPoint","fractions","colors","cycleMethod","colorSpace","transform"}) public LinearGradientPaint(Point2D start, Point2D end, float[] fractions, Color[] colors, MultipleGradientPaint.CycleMethod cycleMethod, MultipleGradientPaint.ColorSpaceType colorSpace, AffineTransform gradientTransform)
LinearGradientPaint
.start
- the gradient axis start Point2D
in user spaceend
- the gradient axis end Point2D
in user spacefractions
- numbers ranging from 0.0 to 1.0 specifying the
distribution of colors along the gradientcolors
- array of colors corresponding to each fractional valuecycleMethod
- either NO_CYCLE
, REFLECT
,
or REPEAT
colorSpace
- which color space to use for interpolation,
either SRGB
or LINEAR_RGB
gradientTransform
- transform to apply to the gradientNullPointerException
- if one of the points is null,
or fractions
array is null,
or colors
array is null,
or cycleMethod
is null,
or colorSpace
is null,
or gradientTransform
is nullIllegalArgumentException
- if start and end points are the same points,
or fractions.length != colors.length
,
or colors
is less than 2 in size,
or a fractions
value is less than 0.0 or greater than 1.0,
or the fractions
are not provided in strictly increasing orderpublic PaintContext createContext(ColorModel cm, Rectangle deviceBounds, Rectangle2D userBounds, AffineTransform transform, RenderingHints hints)
PaintContext
used to
generate a linear color gradient pattern.
See the specification
of the
method in the Paint
interface for information
on null parameter handling.cm
- the preferred ColorModel
which represents the most convenient
format for the caller to receive the pixel data, or null
if there is no preference.deviceBounds
- the device space bounding box
of the graphics primitive being rendered.userBounds
- the user space bounding box
of the graphics primitive being rendered.transform
- the AffineTransform
from user
space into device space.hints
- the set of hints that the context object can use to
choose between rendering alternatives.PaintContext
for
generating color patterns.Paint
,
PaintContext
,
ColorModel
,
Rectangle
,
Rectangle2D
,
AffineTransform
,
RenderingHints
public Point2D getStartPoint()
Point2D
object that is a copy of the point
that anchors the first color of this LinearGradientPaint
public Point2D getEndPoint()
Point2D
object that is a copy of the point
that anchors the last color of this LinearGradientPaint
Submit a bug or feature
For further API reference and developer documentation, see Java SE Documentation. That documentation contains more detailed, developer-targeted descriptions, with conceptual overviews, definitions of terms, workarounds, and working code examples.
Copyright © 1993, 2017, Oracle and/or its affiliates. 500 Oracle Parkway
Redwood Shores, CA 94065 USA. All rights reserved.
DRAFT 9-internal+0-adhoc.mlchung.jdk9-jdeps