1 /*
2 * Copyright (c) 2007, 2017, Oracle and/or its affiliates. All rights reserved.
3 * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
4 *
5 * This code is free software; you can redistribute it and/or modify it
6 * under the terms of the GNU General Public License version 2 only, as
7 * published by the Free Software Foundation. Oracle designates this
8 * particular file as subject to the "Classpath" exception as provided
9 * by Oracle in the LICENSE file that accompanied this code.
10 *
11 * This code is distributed in the hope that it will be useful, but WITHOUT
12 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
13 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
14 * version 2 for more details (a copy is included in the LICENSE file that
15 * accompanied this code).
16 *
17 * You should have received a copy of the GNU General Public License version
18 * 2 along with this work; if not, write to the Free Software Foundation,
19 * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
20 *
21 * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
22 * or visit www.oracle.com if you need additional information or have any
23 * questions.
24 */
25
26 package sun.java2d.marlin;
27
28 import java.util.Arrays;
29
30 /**
31 * The <code>DDasher</code> class takes a series of linear commands
32 * (<code>moveTo</code>, <code>lineTo</code>, <code>close</code> and
33 * <code>end</code>) and breaks them into smaller segments according to a
34 * dash pattern array and a starting dash phase.
35 *
36 * <p> Issues: in J2Se, a zero length dash segment as drawn as a very
37 * short dash, whereas Pisces does not draw anything. The PostScript
38 * semantics are unclear.
39 *
40 */
41 final class DDasher implements DPathConsumer2D, MarlinConst {
42
43 static final int REC_LIMIT = 4;
44 static final double ERR = 0.01d;
45 static final double MIN_T_INC = 1.0d / (1 << REC_LIMIT);
46
47 // More than 24 bits of mantissa means we can no longer accurately
48 // measure the number of times cycled through the dash array so we
49 // punt and override the phase to just be 0 past that point.
50 static final double MAX_CYCLES = 16000000.0d;
51
52 private DPathConsumer2D out;
53 private double[] dash;
54 private int dashLen;
55 private double startPhase;
56 private boolean startDashOn;
57 private int startIdx;
58
59 private boolean starting;
60 private boolean needsMoveTo;
61
62 private int idx;
63 private boolean dashOn;
64 private double phase;
65
66 private double sx, sy;
67 private double x0, y0;
68
69 // temporary storage for the current curve
70 private final double[] curCurvepts;
71
72 // per-thread renderer context
73 final DRendererContext rdrCtx;
74
75 // flag to recycle dash array copy
76 boolean recycleDashes;
77
78 // dashes ref (dirty)
79 final DoubleArrayCache.Reference dashes_ref;
80 // firstSegmentsBuffer ref (dirty)
81 final DoubleArrayCache.Reference firstSegmentsBuffer_ref;
82
83 /**
84 * Constructs a <code>DDasher</code>.
85 * @param rdrCtx per-thread renderer context
86 */
87 DDasher(final DRendererContext rdrCtx) {
88 this.rdrCtx = rdrCtx;
89
90 dashes_ref = rdrCtx.newDirtyDoubleArrayRef(INITIAL_ARRAY); // 1K
91
92 firstSegmentsBuffer_ref = rdrCtx.newDirtyDoubleArrayRef(INITIAL_ARRAY); // 1K
93 firstSegmentsBuffer = firstSegmentsBuffer_ref.initial;
94
95 // we need curCurvepts to be able to contain 2 curves because when
96 // dashing curves, we need to subdivide it
97 curCurvepts = new double[8 * 2];
98 }
99
100 /**
101 * Initialize the <code>DDasher</code>.
102 *
103 * @param out an output <code>DPathConsumer2D</code>.
104 * @param dash an array of <code>double</code>s containing the dash pattern
105 * @param dashLen length of the given dash array
106 * @param phase a <code>double</code> containing the dash phase
107 * @param recycleDashes true to indicate to recycle the given dash array
108 * @return this instance
109 */
110 DDasher init(final DPathConsumer2D out, double[] dash, int dashLen,
111 double phase, boolean recycleDashes)
112 {
113 this.out = out;
114
115 // Normalize so 0 <= phase < dash[0]
116 int sidx = 0;
117 dashOn = true;
118 double sum = 0.0d;
119 for (double d : dash) {
120 sum += d;
121 }
122 double cycles = phase / sum;
123 if (phase < 0.0d) {
124 if (-cycles >= MAX_CYCLES) {
125 phase = 0.0d;
126 } else {
127 int fullcycles = FloatMath.floor_int(-cycles);
128 if ((fullcycles & dash.length & 1) != 0) {
129 dashOn = !dashOn;
130 }
131 phase += fullcycles * sum;
132 while (phase < 0.0d) {
133 if (--sidx < 0) {
134 sidx = dash.length - 1;
135 }
136 phase += dash[sidx];
137 dashOn = !dashOn;
138 }
139 }
140 } else if (phase > 0.0d) {
141 if (cycles >= MAX_CYCLES) {
142 phase = 0.0d;
143 } else {
144 int fullcycles = FloatMath.floor_int(cycles);
145 if ((fullcycles & dash.length & 1) != 0) {
146 dashOn = !dashOn;
147 }
148 phase -= fullcycles * sum;
149 double d;
150 while (phase >= (d = dash[sidx])) {
151 phase -= d;
152 sidx = (sidx + 1) % dash.length;
153 dashOn = !dashOn;
154 }
155 }
156 }
157
158 this.dash = dash;
159 this.dashLen = dashLen;
160 this.phase = phase;
161 this.startPhase = phase;
162 this.startDashOn = dashOn;
163 this.startIdx = sidx;
164 this.starting = true;
165 this.needsMoveTo = false;
166 this.firstSegidx = 0;
167
168 this.recycleDashes = recycleDashes;
169
170 return this; // fluent API
171 }
172
173 /**
174 * Disposes this dasher:
175 * clean up before reusing this instance
176 */
177 void dispose() {
178 if (DO_CLEAN_DIRTY) {
179 // Force zero-fill dirty arrays:
180 Arrays.fill(curCurvepts, 0.0d);
181 }
182 // Return arrays:
183 if (recycleDashes) {
184 dash = dashes_ref.putArray(dash);
185 }
186 firstSegmentsBuffer = firstSegmentsBuffer_ref.putArray(firstSegmentsBuffer);
187 }
188
189 double[] copyDashArray(final float[] dashes) {
190 final int len = dashes.length;
191 final double[] newDashes;
192 if (len <= MarlinConst.INITIAL_ARRAY) {
193 newDashes = dashes_ref.initial;
194 } else {
195 if (DO_STATS) {
196 rdrCtx.stats.stat_array_dasher_dasher.add(len);
197 }
198 newDashes = dashes_ref.getArray(len);
199 }
200 for (int i = 0; i < len; i++) { newDashes[i] = dashes[i]; }
201 return newDashes;
202 }
203
204 @Override
205 public void moveTo(final double x0, final double y0) {
206 if (firstSegidx != 0) {
207 out.moveTo(sx, sy);
208 emitFirstSegments();
209 }
210 needsMoveTo = true;
211 this.idx = startIdx;
212 this.dashOn = this.startDashOn;
213 this.phase = this.startPhase;
214 this.sx = x0;
215 this.sy = y0;
216 this.x0 = x0;
217 this.y0 = y0;
218 this.starting = true;
219 }
220
221 private void emitSeg(double[] buf, int off, int type) {
222 switch (type) {
223 case 8:
224 out.curveTo(buf[off+0], buf[off+1],
225 buf[off+2], buf[off+3],
226 buf[off+4], buf[off+5]);
227 return;
228 case 6:
229 out.quadTo(buf[off+0], buf[off+1],
230 buf[off+2], buf[off+3]);
231 return;
232 case 4:
233 out.lineTo(buf[off], buf[off+1]);
234 return;
235 default:
236 }
237 }
238
239 private void emitFirstSegments() {
240 final double[] fSegBuf = firstSegmentsBuffer;
241
242 for (int i = 0, len = firstSegidx; i < len; ) {
243 int type = (int)fSegBuf[i];
244 emitSeg(fSegBuf, i + 1, type);
245 i += (type - 1);
246 }
247 firstSegidx = 0;
248 }
249 // We don't emit the first dash right away. If we did, caps would be
250 // drawn on it, but we need joins to be drawn if there's a closePath()
251 // So, we store the path elements that make up the first dash in the
252 // buffer below.
253 private double[] firstSegmentsBuffer; // dynamic array
254 private int firstSegidx;
255
256 // precondition: pts must be in relative coordinates (relative to x0,y0)
257 private void goTo(final double[] pts, final int off, final int type,
258 final boolean on)
259 {
260 final int index = off + type;
261 final double x = pts[index - 4];
262 final double y = pts[index - 3];
263
264 if (on) {
265 if (starting) {
266 goTo_starting(pts, off, type);
267 } else {
268 if (needsMoveTo) {
269 needsMoveTo = false;
270 out.moveTo(x0, y0);
271 }
272 emitSeg(pts, off, type);
273 }
274 } else {
275 if (starting) {
276 // low probability test (hotspot)
277 starting = false;
278 }
279 needsMoveTo = true;
280 }
281 this.x0 = x;
282 this.y0 = y;
283 }
284
285 private void goTo_starting(final double[] pts, final int off, final int type) {
286 int len = type - 1; // - 2 + 1
287 int segIdx = firstSegidx;
288 double[] buf = firstSegmentsBuffer;
289
290 if (segIdx + len > buf.length) {
291 if (DO_STATS) {
292 rdrCtx.stats.stat_array_dasher_firstSegmentsBuffer
293 .add(segIdx + len);
294 }
295 firstSegmentsBuffer = buf
296 = firstSegmentsBuffer_ref.widenArray(buf, segIdx,
297 segIdx + len);
298 }
299 buf[segIdx++] = type;
300 len--;
301 // small arraycopy (2, 4 or 6) but with offset:
302 System.arraycopy(pts, off, buf, segIdx, len);
303 firstSegidx = segIdx + len;
304 }
305
306 @Override
307 public void lineTo(final double x1, final double y1) {
308 final double dx = x1 - x0;
309 final double dy = y1 - y0;
310
311 double len = dx*dx + dy*dy;
312 if (len == 0.0d) {
313 return;
314 }
315 len = Math.sqrt(len);
316
317 // The scaling factors needed to get the dx and dy of the
318 // transformed dash segments.
319 final double cx = dx / len;
320 final double cy = dy / len;
321
322 final double[] _curCurvepts = curCurvepts;
323 final double[] _dash = dash;
324 final int _dashLen = this.dashLen;
325
326 int _idx = idx;
327 boolean _dashOn = dashOn;
328 double _phase = phase;
329
330 double leftInThisDashSegment;
331 double d, dashdx, dashdy, p;
332
333 while (true) {
334 d = _dash[_idx];
335 leftInThisDashSegment = d - _phase;
336
337 if (len <= leftInThisDashSegment) {
338 _curCurvepts[0] = x1;
339 _curCurvepts[1] = y1;
340
341 goTo(_curCurvepts, 0, 4, _dashOn);
342
343 // Advance phase within current dash segment
344 _phase += len;
345
346 // TODO: compare double values using epsilon:
347 if (len == leftInThisDashSegment) {
348 _phase = 0.0d;
349 _idx = (_idx + 1) % _dashLen;
350 _dashOn = !_dashOn;
351 }
352
353 // Save local state:
354 idx = _idx;
355 dashOn = _dashOn;
356 phase = _phase;
357 return;
358 }
359
360 dashdx = d * cx;
361 dashdy = d * cy;
362
363 if (_phase == 0.0d) {
364 _curCurvepts[0] = x0 + dashdx;
365 _curCurvepts[1] = y0 + dashdy;
366 } else {
367 p = leftInThisDashSegment / d;
368 _curCurvepts[0] = x0 + p * dashdx;
369 _curCurvepts[1] = y0 + p * dashdy;
370 }
371
372 goTo(_curCurvepts, 0, 4, _dashOn);
373
374 len -= leftInThisDashSegment;
375 // Advance to next dash segment
376 _idx = (_idx + 1) % _dashLen;
377 _dashOn = !_dashOn;
378 _phase = 0.0d;
379 }
380 }
381
382 // shared instance in DDasher
383 private final LengthIterator li = new LengthIterator();
384
385 // preconditions: curCurvepts must be an array of length at least 2 * type,
386 // that contains the curve we want to dash in the first type elements
387 private void somethingTo(int type) {
388 if (pointCurve(curCurvepts, type)) {
389 return;
390 }
391 final LengthIterator _li = li;
392 final double[] _curCurvepts = curCurvepts;
393 final double[] _dash = dash;
394 final int _dashLen = this.dashLen;
395
396 _li.initializeIterationOnCurve(_curCurvepts, type);
397
398 int _idx = idx;
399 boolean _dashOn = dashOn;
400 double _phase = phase;
401
402 // initially the current curve is at curCurvepts[0...type]
403 int curCurveoff = 0;
404 double lastSplitT = 0.0d;
405 double t;
406 double leftInThisDashSegment = _dash[_idx] - _phase;
407
408 while ((t = _li.next(leftInThisDashSegment)) < 1.0d) {
409 if (t != 0.0d) {
410 DHelpers.subdivideAt((t - lastSplitT) / (1.0d - lastSplitT),
411 _curCurvepts, curCurveoff,
412 _curCurvepts, 0,
413 _curCurvepts, type, type);
414 lastSplitT = t;
415 goTo(_curCurvepts, 2, type, _dashOn);
416 curCurveoff = type;
417 }
418 // Advance to next dash segment
419 _idx = (_idx + 1) % _dashLen;
420 _dashOn = !_dashOn;
421 _phase = 0.0d;
422 leftInThisDashSegment = _dash[_idx];
423 }
424
425 goTo(_curCurvepts, curCurveoff + 2, type, _dashOn);
426
427 _phase += _li.lastSegLen();
428 if (_phase >= _dash[_idx]) {
429 _phase = 0.0d;
430 _idx = (_idx + 1) % _dashLen;
431 _dashOn = !_dashOn;
432 }
433 // Save local state:
434 idx = _idx;
435 dashOn = _dashOn;
436 phase = _phase;
437
438 // reset LengthIterator:
439 _li.reset();
440 }
441
442 private static boolean pointCurve(double[] curve, int type) {
443 for (int i = 2; i < type; i++) {
444 if (curve[i] != curve[i-2]) {
445 return false;
446 }
447 }
448 return true;
449 }
450
451 // Objects of this class are used to iterate through curves. They return
452 // t values where the left side of the curve has a specified length.
453 // It does this by subdividing the input curve until a certain error
454 // condition has been met. A recursive subdivision procedure would
455 // return as many as 1<<limit curves, but this is an iterator and we
456 // don't need all the curves all at once, so what we carry out a
457 // lazy inorder traversal of the recursion tree (meaning we only move
458 // through the tree when we need the next subdivided curve). This saves
459 // us a lot of memory because at any one time we only need to store
460 // limit+1 curves - one for each level of the tree + 1.
461 // NOTE: the way we do things here is not enough to traverse a general
462 // tree; however, the trees we are interested in have the property that
463 // every non leaf node has exactly 2 children
464 static final class LengthIterator {
465 private enum Side {LEFT, RIGHT}
466 // Holds the curves at various levels of the recursion. The root
467 // (i.e. the original curve) is at recCurveStack[0] (but then it
468 // gets subdivided, the left half is put at 1, so most of the time
469 // only the right half of the original curve is at 0)
470 private final double[][] recCurveStack; // dirty
471 // sides[i] indicates whether the node at level i+1 in the path from
472 // the root to the current leaf is a left or right child of its parent.
473 private final Side[] sides; // dirty
474 private int curveType;
475 // lastT and nextT delimit the current leaf.
476 private double nextT;
477 private double lenAtNextT;
478 private double lastT;
479 private double lenAtLastT;
480 private double lenAtLastSplit;
481 private double lastSegLen;
482 // the current level in the recursion tree. 0 is the root. limit
483 // is the deepest possible leaf.
484 private int recLevel;
485 private boolean done;
486
487 // the lengths of the lines of the control polygon. Only its first
488 // curveType/2 - 1 elements are valid. This is an optimization. See
489 // next() for more detail.
490 private final double[] curLeafCtrlPolyLengths = new double[3];
491
492 LengthIterator() {
493 this.recCurveStack = new double[REC_LIMIT + 1][8];
494 this.sides = new Side[REC_LIMIT];
495 // if any methods are called without first initializing this object
496 // on a curve, we want it to fail ASAP.
497 this.nextT = Double.MAX_VALUE;
498 this.lenAtNextT = Double.MAX_VALUE;
499 this.lenAtLastSplit = Double.MIN_VALUE;
500 this.recLevel = Integer.MIN_VALUE;
501 this.lastSegLen = Double.MAX_VALUE;
502 this.done = true;
503 }
504
505 /**
506 * Reset this LengthIterator.
507 */
508 void reset() {
509 // keep data dirty
510 // as it appears not useful to reset data:
511 if (DO_CLEAN_DIRTY) {
512 final int recLimit = recCurveStack.length - 1;
513 for (int i = recLimit; i >= 0; i--) {
514 Arrays.fill(recCurveStack[i], 0.0d);
515 }
516 Arrays.fill(sides, Side.LEFT);
517 Arrays.fill(curLeafCtrlPolyLengths, 0.0d);
518 Arrays.fill(nextRoots, 0.0d);
519 Arrays.fill(flatLeafCoefCache, 0.0d);
520 flatLeafCoefCache[2] = -1.0d;
521 }
522 }
523
524 void initializeIterationOnCurve(double[] pts, int type) {
525 // optimize arraycopy (8 values faster than 6 = type):
526 System.arraycopy(pts, 0, recCurveStack[0], 0, 8);
527 this.curveType = type;
528 this.recLevel = 0;
529 this.lastT = 0.0d;
530 this.lenAtLastT = 0.0d;
531 this.nextT = 0.0d;
532 this.lenAtNextT = 0.0d;
533 goLeft(); // initializes nextT and lenAtNextT properly
534 this.lenAtLastSplit = 0.0d;
535 if (recLevel > 0) {
536 this.sides[0] = Side.LEFT;
537 this.done = false;
538 } else {
539 // the root of the tree is a leaf so we're done.
540 this.sides[0] = Side.RIGHT;
541 this.done = true;
542 }
543 this.lastSegLen = 0.0d;
544 }
545
546 // 0 == false, 1 == true, -1 == invalid cached value.
547 private int cachedHaveLowAcceleration = -1;
548
549 private boolean haveLowAcceleration(double err) {
550 if (cachedHaveLowAcceleration == -1) {
551 final double len1 = curLeafCtrlPolyLengths[0];
552 final double len2 = curLeafCtrlPolyLengths[1];
553 // the test below is equivalent to !within(len1/len2, 1, err).
554 // It is using a multiplication instead of a division, so it
555 // should be a bit faster.
556 if (!DHelpers.within(len1, len2, err * len2)) {
557 cachedHaveLowAcceleration = 0;
558 return false;
559 }
560 if (curveType == 8) {
561 final double len3 = curLeafCtrlPolyLengths[2];
562 // if len1 is close to 2 and 2 is close to 3, that probably
563 // means 1 is close to 3 so the second part of this test might
564 // not be needed, but it doesn't hurt to include it.
565 final double errLen3 = err * len3;
566 if (!(DHelpers.within(len2, len3, errLen3) &&
567 DHelpers.within(len1, len3, errLen3))) {
568 cachedHaveLowAcceleration = 0;
569 return false;
570 }
571 }
572 cachedHaveLowAcceleration = 1;
573 return true;
574 }
575
576 return (cachedHaveLowAcceleration == 1);
577 }
578
579 // we want to avoid allocations/gc so we keep this array so we
580 // can put roots in it,
581 private final double[] nextRoots = new double[4];
582
583 // caches the coefficients of the current leaf in its flattened
584 // form (see inside next() for what that means). The cache is
585 // invalid when it's third element is negative, since in any
586 // valid flattened curve, this would be >= 0.
587 private final double[] flatLeafCoefCache = new double[]{0.0d, 0.0d, -1.0d, 0.0d};
588
589 // returns the t value where the remaining curve should be split in
590 // order for the left subdivided curve to have length len. If len
591 // is >= than the length of the uniterated curve, it returns 1.
592 double next(final double len) {
593 final double targetLength = lenAtLastSplit + len;
594 while (lenAtNextT < targetLength) {
595 if (done) {
596 lastSegLen = lenAtNextT - lenAtLastSplit;
597 return 1.0d;
598 }
599 goToNextLeaf();
600 }
601 lenAtLastSplit = targetLength;
602 final double leaflen = lenAtNextT - lenAtLastT;
603 double t = (targetLength - lenAtLastT) / leaflen;
604
605 // cubicRootsInAB is a fairly expensive call, so we just don't do it
606 // if the acceleration in this section of the curve is small enough.
607 if (!haveLowAcceleration(0.05d)) {
608 // We flatten the current leaf along the x axis, so that we're
609 // left with a, b, c which define a 1D Bezier curve. We then
610 // solve this to get the parameter of the original leaf that
611 // gives us the desired length.
612 final double[] _flatLeafCoefCache = flatLeafCoefCache;
613
614 if (_flatLeafCoefCache[2] < 0.0d) {
615 double x = curLeafCtrlPolyLengths[0],
616 y = x + curLeafCtrlPolyLengths[1];
617 if (curveType == 8) {
618 double z = y + curLeafCtrlPolyLengths[2];
619 _flatLeafCoefCache[0] = 3.0d * (x - y) + z;
620 _flatLeafCoefCache[1] = 3.0d * (y - 2.0d * x);
621 _flatLeafCoefCache[2] = 3.0d * x;
622 _flatLeafCoefCache[3] = -z;
623 } else if (curveType == 6) {
624 _flatLeafCoefCache[0] = 0.0d;
625 _flatLeafCoefCache[1] = y - 2.0d * x;
626 _flatLeafCoefCache[2] = 2.0d * x;
627 _flatLeafCoefCache[3] = -y;
628 }
629 }
630 double a = _flatLeafCoefCache[0];
631 double b = _flatLeafCoefCache[1];
632 double c = _flatLeafCoefCache[2];
633 double d = t * _flatLeafCoefCache[3];
634
635 // we use cubicRootsInAB here, because we want only roots in 0, 1,
636 // and our quadratic root finder doesn't filter, so it's just a
637 // matter of convenience.
638 int n = DHelpers.cubicRootsInAB(a, b, c, d, nextRoots, 0, 0.0d, 1.0d);
639 if (n == 1 && !Double.isNaN(nextRoots[0])) {
640 t = nextRoots[0];
641 }
642 }
643 // t is relative to the current leaf, so we must make it a valid parameter
644 // of the original curve.
645 t = t * (nextT - lastT) + lastT;
646 if (t >= 1.0d) {
647 t = 1.0d;
648 done = true;
649 }
650 // even if done = true, if we're here, that means targetLength
651 // is equal to, or very, very close to the total length of the
652 // curve, so lastSegLen won't be too high. In cases where len
653 // overshoots the curve, this method will exit in the while
654 // loop, and lastSegLen will still be set to the right value.
655 lastSegLen = len;
656 return t;
657 }
658
659 double lastSegLen() {
660 return lastSegLen;
661 }
662
663 // go to the next leaf (in an inorder traversal) in the recursion tree
664 // preconditions: must be on a leaf, and that leaf must not be the root.
665 private void goToNextLeaf() {
666 // We must go to the first ancestor node that has an unvisited
667 // right child.
668 int _recLevel = recLevel;
669 final Side[] _sides = sides;
670
671 _recLevel--;
672 while(_sides[_recLevel] == Side.RIGHT) {
673 if (_recLevel == 0) {
674 recLevel = 0;
675 done = true;
676 return;
677 }
678 _recLevel--;
679 }
680
681 _sides[_recLevel] = Side.RIGHT;
682 // optimize arraycopy (8 values faster than 6 = type):
683 System.arraycopy(recCurveStack[_recLevel], 0,
684 recCurveStack[_recLevel+1], 0, 8);
685 _recLevel++;
686
687 recLevel = _recLevel;
688 goLeft();
689 }
690
691 // go to the leftmost node from the current node. Return its length.
692 private void goLeft() {
693 double len = onLeaf();
694 if (len >= 0.0d) {
695 lastT = nextT;
696 lenAtLastT = lenAtNextT;
697 nextT += (1 << (REC_LIMIT - recLevel)) * MIN_T_INC;
698 lenAtNextT += len;
699 // invalidate caches
700 flatLeafCoefCache[2] = -1.0d;
701 cachedHaveLowAcceleration = -1;
702 } else {
703 DHelpers.subdivide(recCurveStack[recLevel], 0,
704 recCurveStack[recLevel+1], 0,
705 recCurveStack[recLevel], 0, curveType);
706 sides[recLevel] = Side.LEFT;
707 recLevel++;
708 goLeft();
709 }
710 }
711
712 // this is a bit of a hack. It returns -1 if we're not on a leaf, and
713 // the length of the leaf if we are on a leaf.
714 private double onLeaf() {
715 final double[] curve = recCurveStack[recLevel];
716 final int _curveType = curveType;
717 double polyLen = 0.0d;
718
719 double x0 = curve[0], y0 = curve[1];
720 for (int i = 2; i < _curveType; i += 2) {
721 final double x1 = curve[i], y1 = curve[i+1];
722 final double len = DHelpers.linelen(x0, y0, x1, y1);
723 polyLen += len;
724 curLeafCtrlPolyLengths[i/2 - 1] = len;
725 x0 = x1;
726 y0 = y1;
727 }
728
729 final double lineLen = DHelpers.linelen(curve[0], curve[1],
730 curve[_curveType-2],
731 curve[_curveType-1]);
732 if ((polyLen - lineLen) < ERR || recLevel == REC_LIMIT) {
733 return (polyLen + lineLen) / 2.0d;
734 }
735 return -1.0d;
736 }
737 }
738
739 @Override
740 public void curveTo(final double x1, final double y1,
741 final double x2, final double y2,
742 final double x3, final double y3)
743 {
744 final double[] _curCurvepts = curCurvepts;
745 _curCurvepts[0] = x0; _curCurvepts[1] = y0;
746 _curCurvepts[2] = x1; _curCurvepts[3] = y1;
747 _curCurvepts[4] = x2; _curCurvepts[5] = y2;
748 _curCurvepts[6] = x3; _curCurvepts[7] = y3;
749 somethingTo(8);
750 }
751
752 @Override
753 public void quadTo(final double x1, final double y1,
754 final double x2, final double y2)
755 {
756 final double[] _curCurvepts = curCurvepts;
757 _curCurvepts[0] = x0; _curCurvepts[1] = y0;
758 _curCurvepts[2] = x1; _curCurvepts[3] = y1;
759 _curCurvepts[4] = x2; _curCurvepts[5] = y2;
760 somethingTo(6);
761 }
762
763 @Override
764 public void closePath() {
765 lineTo(sx, sy);
766 if (firstSegidx != 0) {
767 if (!dashOn || needsMoveTo) {
768 out.moveTo(sx, sy);
769 }
770 emitFirstSegments();
771 }
772 moveTo(sx, sy);
773 }
774
775 @Override
776 public void pathDone() {
777 if (firstSegidx != 0) {
778 out.moveTo(sx, sy);
779 emitFirstSegments();
780 }
781 out.pathDone();
782
783 // Dispose this instance:
784 dispose();
785 }
786
787 @Override
788 public long getNativeConsumer() {
789 throw new InternalError("DDasher does not use a native consumer");
790 }
791 }
792