- java.lang.Object
-
- java.text.Collator
-
- All Implemented Interfaces:
Cloneable
,Comparator<Object>
- Direct Known Subclasses:
RuleBasedCollator
public abstract class Collator extends Object implements Comparator<Object>, Cloneable
TheCollator
class performs locale-sensitiveString
comparison. You use this class to build searching and sorting routines for natural language text.Collator
is an abstract base class. Subclasses implement specific collation strategies. One subclass,RuleBasedCollator
, is currently provided with the Java Platform and is applicable to a wide set of languages. Other subclasses may be created to handle more specialized needs.Like other locale-sensitive classes, you can use the static factory method,
getInstance
, to obtain the appropriateCollator
object for a given locale. You will only need to look at the subclasses ofCollator
if you need to understand the details of a particular collation strategy or if you need to modify that strategy.The following example shows how to compare two strings using the
Collator
for the default locale.// Compare two strings in the default locale Collator myCollator = Collator.getInstance(); if( myCollator.compare("abc", "ABC") < 0 ) System.out.println("abc is less than ABC"); else System.out.println("abc is greater than or equal to ABC");
You can set a
Collator
's strength property to determine the level of difference considered significant in comparisons. Four strengths are provided:PRIMARY
,SECONDARY
,TERTIARY
, andIDENTICAL
. The exact assignment of strengths to language features is locale dependant. For example, in Czech, "e" and "f" are considered primary differences, while "e" and "ě" are secondary differences, "e" and "E" are tertiary differences and "e" and "e" are identical. The following shows how both case and accents could be ignored for US English.//Get the Collator for US English and set its strength to PRIMARY Collator usCollator = Collator.getInstance(Locale.US); usCollator.setStrength(Collator.PRIMARY); if( usCollator.compare("abc", "ABC") == 0 ) { System.out.println("Strings are equivalent"); }
For comparing
String
s exactly once, thecompare
method provides the best performance. When sorting a list ofString
s however, it is generally necessary to compare eachString
multiple times. In this case,CollationKey
s provide better performance. TheCollationKey
class converts aString
to a series of bits that can be compared bitwise against otherCollationKey
s. ACollationKey
is created by aCollator
object for a givenString
.
Note:CollationKey
s from differentCollator
s can not be compared. See the class description forCollationKey
for an example usingCollationKey
s.- Since:
- 1.1
- See Also:
RuleBasedCollator
,CollationKey
,CollationElementIterator
,Locale
-
-
Field Summary
Fields Modifier and Type Field Description static int
CANONICAL_DECOMPOSITION
Decomposition mode value.static int
FULL_DECOMPOSITION
Decomposition mode value.static int
IDENTICAL
Collator strength value.static int
NO_DECOMPOSITION
Decomposition mode value.static int
PRIMARY
Collator strength value.static int
SECONDARY
Collator strength value.static int
TERTIARY
Collator strength value.
-
Constructor Summary
Constructors Modifier Constructor Description protected
Collator()
Default constructor.
-
Method Summary
All Methods Static Methods Instance Methods Abstract Methods Concrete Methods Modifier and Type Method Description Object
clone()
Overrides Cloneableint
compare(Object o1, Object o2)
Compares its two arguments for order.abstract int
compare(String source, String target)
Compares the source string to the target string according to the collation rules for this Collator.boolean
equals(Object that)
Compares the equality of two Collators.boolean
equals(String source, String target)
Convenience method for comparing the equality of two strings based on this Collator's collation rules.static Locale[]
getAvailableLocales()
Returns an array of all locales for which thegetInstance
methods of this class can return localized instances.abstract CollationKey
getCollationKey(String source)
Transforms the String into a series of bits that can be compared bitwise to other CollationKeys.int
getDecomposition()
Get the decomposition mode of this Collator.static Collator
getInstance()
Gets the Collator for the current default locale.static Collator
getInstance(Locale desiredLocale)
Gets the Collator for the desired locale.int
getStrength()
Returns this Collator's strength property.abstract int
hashCode()
Generates the hash code for this Collator.void
setDecomposition(int decompositionMode)
Set the decomposition mode of this Collator.void
setStrength(int newStrength)
Sets this Collator's strength property.-
Methods inherited from interface java.util.Comparator
comparing, comparing, comparingDouble, comparingInt, comparingLong, naturalOrder, nullsFirst, nullsLast, reversed, reverseOrder, thenComparing, thenComparing, thenComparing, thenComparingDouble, thenComparingInt, thenComparingLong
-
-
-
-
Field Detail
-
PRIMARY
public static final int PRIMARY
Collator strength value. When set, only PRIMARY differences are considered significant during comparison. The assignment of strengths to language features is locale dependant. A common example is for different base letters ("a" vs "b") to be considered a PRIMARY difference.- See Also:
setStrength(int)
,getStrength()
, Constant Field Values
-
SECONDARY
public static final int SECONDARY
Collator strength value. When set, only SECONDARY and above differences are considered significant during comparison. The assignment of strengths to language features is locale dependant. A common example is for different accented forms of the same base letter ("a" vs "ä") to be considered a SECONDARY difference.- See Also:
setStrength(int)
,getStrength()
, Constant Field Values
-
TERTIARY
public static final int TERTIARY
Collator strength value. When set, only TERTIARY and above differences are considered significant during comparison. The assignment of strengths to language features is locale dependant. A common example is for case differences ("a" vs "A") to be considered a TERTIARY difference.- See Also:
setStrength(int)
,getStrength()
, Constant Field Values
-
IDENTICAL
public static final int IDENTICAL
Collator strength value. When set, all differences are considered significant during comparison. The assignment of strengths to language features is locale dependant. A common example is for control characters ("\u0001" vs "\u0002") to be considered equal at the PRIMARY, SECONDARY, and TERTIARY levels but different at the IDENTICAL level. Additionally, differences between pre-composed accents such as "\u00C0" (A-grave) and combining accents such as "A\u0300" (A, combining-grave) will be considered significant at the IDENTICAL level if decomposition is set to NO_DECOMPOSITION.- See Also:
- Constant Field Values
-
NO_DECOMPOSITION
public static final int NO_DECOMPOSITION
Decomposition mode value. With NO_DECOMPOSITION set, accented characters will not be decomposed for collation. This is the default setting and provides the fastest collation but will only produce correct results for languages that do not use accents.
-
CANONICAL_DECOMPOSITION
public static final int CANONICAL_DECOMPOSITION
Decomposition mode value. With CANONICAL_DECOMPOSITION set, characters that are canonical variants according to Unicode standard will be decomposed for collation. This should be used to get correct collation of accented characters.CANONICAL_DECOMPOSITION corresponds to Normalization Form D as described in Unicode Technical Report #15.
-
FULL_DECOMPOSITION
public static final int FULL_DECOMPOSITION
Decomposition mode value. With FULL_DECOMPOSITION set, both Unicode canonical variants and Unicode compatibility variants will be decomposed for collation. This causes not only accented characters to be collated, but also characters that have special formats to be collated with their norminal form. For example, the half-width and full-width ASCII and Katakana characters are then collated together. FULL_DECOMPOSITION is the most complete and therefore the slowest decomposition mode.FULL_DECOMPOSITION corresponds to Normalization Form KD as described in Unicode Technical Report #15.
-
-
Constructor Detail
-
Collator
protected Collator()
Default constructor. This constructor is protected so subclasses can get access to it. Users typically create a Collator sub-class by calling the factory method getInstance.- See Also:
getInstance()
-
-
Method Detail
-
getInstance
public static Collator getInstance()
Gets the Collator for the current default locale. The default locale is determined by java.util.Locale.getDefault.- Returns:
- the Collator for the default locale.(for example, en_US)
- See Also:
Locale.getDefault()
-
getInstance
public static Collator getInstance(Locale desiredLocale)
Gets the Collator for the desired locale.- Parameters:
desiredLocale
- the desired locale.- Returns:
- the Collator for the desired locale.
- See Also:
Locale
,ResourceBundle
-
compare
public abstract int compare(String source, String target)
Compares the source string to the target string according to the collation rules for this Collator. Returns an integer less than, equal to or greater than zero depending on whether the source String is less than, equal to or greater than the target string. See the Collator class description for an example of use.For a one time comparison, this method has the best performance. If a given String will be involved in multiple comparisons, CollationKey.compareTo has the best performance. See the Collator class description for an example using CollationKeys.
- Parameters:
source
- the source string.target
- the target string.- Returns:
- Returns an integer value. Value is less than zero if source is less than target, value is zero if source and target are equal, value is greater than zero if source is greater than target.
- See Also:
CollationKey
,getCollationKey(java.lang.String)
-
compare
public int compare(Object o1, Object o2)
Compares its two arguments for order. Returns a negative integer, zero, or a positive integer as the first argument is less than, equal to, or greater than the second.This implementation merely returns
compare((String)o1, (String)o2)
.- Specified by:
compare
in interfaceComparator<Object>
- Parameters:
o1
- the first object to be compared.o2
- the second object to be compared.- Returns:
- a negative integer, zero, or a positive integer as the first argument is less than, equal to, or greater than the second.
- Throws:
ClassCastException
- the arguments cannot be cast to Strings.- Since:
- 1.2
- See Also:
Comparator
-
getCollationKey
public abstract CollationKey getCollationKey(String source)
Transforms the String into a series of bits that can be compared bitwise to other CollationKeys. CollationKeys provide better performance than Collator.compare when Strings are involved in multiple comparisons. See the Collator class description for an example using CollationKeys.- Parameters:
source
- the string to be transformed into a collation key.- Returns:
- the CollationKey for the given String based on this Collator's collation rules. If the source String is null, a null CollationKey is returned.
- See Also:
CollationKey
,compare(java.lang.String, java.lang.String)
-
equals
public boolean equals(String source, String target)
Convenience method for comparing the equality of two strings based on this Collator's collation rules.- Parameters:
source
- the source string to be compared with.target
- the target string to be compared with.- Returns:
- true if the strings are equal according to the collation rules. false, otherwise.
- See Also:
compare(java.lang.String, java.lang.String)
-
getStrength
public int getStrength()
Returns this Collator's strength property. The strength property determines the minimum level of difference considered significant during comparison. See the Collator class description for an example of use.- Returns:
- this Collator's current strength property.
- See Also:
setStrength(int)
,PRIMARY
,SECONDARY
,TERTIARY
,IDENTICAL
-
setStrength
public void setStrength(int newStrength)
Sets this Collator's strength property. The strength property determines the minimum level of difference considered significant during comparison. See the Collator class description for an example of use.- Parameters:
newStrength
- the new strength value.- Throws:
IllegalArgumentException
- If the new strength value is not one of PRIMARY, SECONDARY, TERTIARY or IDENTICAL.- See Also:
getStrength()
,PRIMARY
,SECONDARY
,TERTIARY
,IDENTICAL
-
getDecomposition
public int getDecomposition()
Get the decomposition mode of this Collator. Decomposition mode determines how Unicode composed characters are handled. Adjusting decomposition mode allows the user to select between faster and more complete collation behavior.The three values for decomposition mode are:
- NO_DECOMPOSITION,
- CANONICAL_DECOMPOSITION
- FULL_DECOMPOSITION.
- Returns:
- the decomposition mode
- See Also:
setDecomposition(int)
,NO_DECOMPOSITION
,CANONICAL_DECOMPOSITION
,FULL_DECOMPOSITION
-
setDecomposition
public void setDecomposition(int decompositionMode)
Set the decomposition mode of this Collator. See getDecomposition for a description of decomposition mode.- Parameters:
decompositionMode
- the new decomposition mode.- Throws:
IllegalArgumentException
- If the given value is not a valid decomposition mode.- See Also:
getDecomposition()
,NO_DECOMPOSITION
,CANONICAL_DECOMPOSITION
,FULL_DECOMPOSITION
-
getAvailableLocales
public static Locale[] getAvailableLocales()
Returns an array of all locales for which thegetInstance
methods of this class can return localized instances. The returned array represents the union of locales supported by the Java runtime and by installedCollatorProvider
implementations. It must contain at least a Locale instance equal toLocale.US
.- Returns:
- An array of locales for which localized
Collator
instances are available.
-
clone
public Object clone()
Overrides Cloneable
-
equals
public boolean equals(Object that)
Compares the equality of two Collators.- Specified by:
equals
in interfaceComparator<Object>
- Overrides:
equals
in classObject
- Parameters:
that
- the Collator to be compared with this.- Returns:
- true if this Collator is the same as that Collator; false otherwise.
- See Also:
Object.hashCode()
,HashMap
-
hashCode
public abstract int hashCode()
Generates the hash code for this Collator.- Overrides:
hashCode
in classObject
- Returns:
- a hash code value for this object.
- See Also:
Object.equals(java.lang.Object)
,System.identityHashCode(java.lang.Object)
-
-