public class LogManager extends Object
This LogManager object:
- Manages a hierarchical namespace of Logger objects. All named Loggers are stored in this namespace.
- Manages a set of logging control properties. These are simple key-value pairs that can be used by Handlers and other logging objects to configure themselves.
The global LogManager object can be retrieved using LogManager.getLogManager(). The LogManager object is created during class initialization and cannot subsequently be changed.
At startup the LogManager class is located using the java.util.logging.manager system property.
LogManager Configuration
A LogManager initializes the logging configuration via thereadConfiguration()
method during LogManager initialization.
By default, LogManager default configuration is used.
The logging configuration read by LogManager must be in the
properties file format.
The LogManager defines two optional system properties that allow control over
the initial configuration, as specified in the readConfiguration()
method:
java.util.logging.config.class
java.util.logging.config.file
These two system properties may be specified on the command line to the "java" command, or as system property definitions passed to JNI_CreateJavaVM.
The properties for loggers and Handlers will have
names starting with the dot-separated name for the handler or logger.
The global logging properties may include:
- A property "handlers". This defines a whitespace or comma separated list of class names for handler classes to load and register as handlers on the root Logger (the Logger named ""). Each class name must be for a Handler class which has a default constructor. Note that these Handlers may be created lazily, when they are first used.
- A property "<logger>.handlers". This defines a whitespace or comma separated list of class names for handlers classes to load and register as handlers to the specified logger. Each class name must be for a Handler class which has a default constructor. Note that these Handlers may be created lazily, when they are first used.
- A property "<logger>.handlers.ensureCloseOnReset". This defines a
a boolean value. If "<logger>.handlers" is not defined or is empty,
this property is ignored. Otherwise it defaults to
true
. When the value istrue
, the handlers associated with the logger are guaranteed to be closed on reset() and shutdown. This can be turned off by explicitly setting "<logger>.handlers.ensureCloseOnReset=false" in the configuration. Note that turning this property off causes the risk of introducing a resource leak, as the logger may get garbage collected beforereset()
is called, thus preventing its handlers from being closed onreset()
. In that case it is the responsibility of the application to ensure that the handlers are closed before the logger is garbage collected. - A property "<logger>.useParentHandlers". This defines a boolean value. By default every logger calls its parent in addition to handling the logging message itself, this often result in messages being handled by the root logger as well. When setting this property to false a Handler needs to be configured for this logger otherwise no logging messages are delivered.
- A property "config". This property is intended to allow arbitrary configuration code to be run. The property defines a whitespace or comma separated list of class names. A new instance will be created for each named class. The default constructor of each class may execute arbitrary code to update the logging configuration, such as setting logger levels, adding handlers, adding filters, etc.
Note that all classes loaded during LogManager configuration are first searched on the system class path before any user class path. That includes the LogManager class, any config classes, and any handler classes.
Loggers are organized into a naming hierarchy based on their dot separated names. Thus "a.b.c" is a child of "a.b", but "a.b1" and a.b2" are peers.
All properties whose names end with ".level" are assumed to define log levels for Loggers. Thus "foo.level" defines a log level for the logger called "foo" and (recursively) for any of its children in the naming hierarchy. Log Levels are applied in the order they are defined in the properties file. Thus level settings for child nodes in the tree should come after settings for their parents. The property name ".level" can be used to set the level for the root of the tree.
All methods on the LogManager object are multi-thread safe.
- Since:
- 1.4
-
Field Summary
Fields Modifier and Type Field Description static String
LOGGING_MXBEAN_NAME
String representation of theObjectName
for the management interface for the logging facility. -
Constructor Summary
Constructors Modifier Constructor Description protected
LogManager()
Protected constructor. -
Method Summary
Modifier and Type Method Description LogManager
addConfigurationListener(Runnable listener)
Adds a configuration listener to be invoked each time the logging configuration is read.boolean
addLogger(Logger logger)
Add a named logger.void
checkAccess()
Check that the current context is trusted to modify the logging configuration.Logger
getLogger(String name)
Method to find a named logger.Enumeration<String>
getLoggerNames()
Get an enumeration of known logger names.static LoggingMXBean
getLoggingMXBean()
Deprecated.static LogManager
getLogManager()
Returns the global LogManager object.String
getProperty(String name)
Get the value of a logging property.void
readConfiguration()
Reads and initializes the logging configuration.void
readConfiguration(InputStream ins)
Reads and initializes the logging configuration from the given input stream.void
removeConfigurationListener(Runnable listener)
Removes a previously registered configuration listener.void
reset()
Reset the logging configuration.void
updateConfiguration(InputStream ins, Function<String,BiFunction<String,String,String>> mapper)
Updates the logging configuration.void
updateConfiguration(Function<String,BiFunction<String,String,String>> mapper)
Updates the logging configuration.
-
Field Details
-
LOGGING_MXBEAN_NAME
String representation of theObjectName
for the management interface for the logging facility.- Since:
- 1.5
- See Also:
PlatformLoggingMXBean
, Constant Field Values
-
-
Constructor Details
-
LogManager
protected LogManager()Protected constructor. This is protected so that container applications (such as J2EE containers) can subclass the object. It is non-public as it is intended that there only be one LogManager object, whose value is retrieved by calling LogManager.getLogManager.
-
-
Method Details
-
getLogManager
Returns the global LogManager object.- Returns:
- the global LogManager object
-
addLogger
Add a named logger. This does nothing and returns false if a logger with the same name is already registered.The Logger factory methods call this method to register each newly created Logger.
The application should retain its own reference to the Logger object to avoid it being garbage collected. The LogManager may only retain a weak reference.
- Parameters:
logger
- the new logger.- Returns:
- true if the argument logger was registered successfully, false if a logger of that name already exists.
- Throws:
NullPointerException
- if the logger name is null.
-
getLogger
Method to find a named logger.Note that since untrusted code may create loggers with arbitrary names this method should not be relied on to find Loggers for security sensitive logging. It is also important to note that the Logger associated with the String
name
may be garbage collected at any time if there is no strong reference to the Logger. The caller of this method must check the return value for null in order to properly handle the case where the Logger has been garbage collected.- Parameters:
name
- name of the logger- Returns:
- matching logger or null if none is found
-
getLoggerNames
Get an enumeration of known logger names.Note: Loggers may be added dynamically as new classes are loaded. This method only reports on the loggers that are currently registered. It is also important to note that this method only returns the name of a Logger, not a strong reference to the Logger itself. The returned String does nothing to prevent the Logger from being garbage collected. In particular, if the returned name is passed to
LogManager.getLogger()
, then the caller must check the return value fromLogManager.getLogger()
for null to properly handle the case where the Logger has been garbage collected in the time since its name was returned by this method.- Returns:
- enumeration of logger name strings
-
readConfiguration
Reads and initializes the logging configuration.If the "java.util.logging.config.class" system property is set, then the property value is treated as a class name. The given class will be loaded, an object will be instantiated, and that object's constructor is responsible for reading in the initial configuration. (That object may use other system properties to control its configuration.) The alternate configuration class can use
readConfiguration(InputStream)
to define properties in the LogManager.If "java.util.logging.config.class" system property is not set, then this method will read the initial configuration from a properties file and calls the
readConfiguration(InputStream)
method to initialize the configuration. The "java.util.logging.config.file" system property can be used to specify the properties file that will be read as the initial configuration; if not set, then the LogManager default configuration is used. The default configuration is typically loaded from the properties file "conf/logging.properties
" in the Java installation directory.Any registered configuration listener will be invoked after the properties are read.
- API Note:
- This
readConfiguration
method should only be used for initializing the configuration during LogManager initialization or used with the "java.util.logging.config.class" property. When this method is called after loggers have been created, and the "java.util.logging.config.class" system property is not set, all existing loggers will be reset. Then any existing loggers that have a level property specified in the new configuration stream will be set to the specified log level.To properly update the logging configuration, use the
updateConfiguration(java.util.function.Function)
orupdateConfiguration(java.io.InputStream, java.util.function.Function)
methods instead. - Throws:
SecurityException
- if a security manager exists and if the caller does not have LoggingPermission("control").IOException
- if there are IO problems reading the configuration.
-
reset
Reset the logging configuration.For all named loggers, the reset operation removes and closes all Handlers and (except for the root logger) sets the level to
null
. The root logger's level is set toLevel.INFO
.- API Note:
- Calling this method also clears the LogManager properties. The
updateConfiguration(Function)
orupdateConfiguration(InputStream, Function)
method can be used to properly update to a new configuration. - Throws:
SecurityException
- if a security manager exists and if the caller does not have LoggingPermission("control").
-
readConfiguration
Reads and initializes the logging configuration from the given input stream.Any registered configuration listener will be invoked after the properties are read.
- API Note:
- This
readConfiguration
method should only be used for initializing the configuration during LogManager initialization or used with the "java.util.logging.config.class" property. When this method is called after loggers have been created, all existing loggers will be reset. Then any existing loggers that have a level property specified in the given input stream will be set to the specified log level.To properly update the logging configuration, use the
updateConfiguration(java.util.function.Function)
orupdateConfiguration(java.io.InputStream, java.util.function.Function)
method instead. - Parameters:
ins
- stream to read properties from- Throws:
SecurityException
- if a security manager exists and if the caller does not have LoggingPermission("control").IOException
- if there are problems reading from the stream, or the given stream is not in the properties file format.
-
updateConfiguration
public void updateConfiguration(Function<String,BiFunction<String,String,String>> mapper) throws IOExceptionUpdates the logging configuration.If the "java.util.logging.config.file" system property is set, then the property value specifies the properties file to be read as the new configuration. Otherwise, the LogManager default configuration is used.
The default configuration is typically loaded from the properties file "conf/logging.properties
" in the Java installation directory.This method reads the new configuration and calls the
updateConfiguration(ins, mapper)
method to update the configuration.- API Note:
- This method updates the logging configuration from reading
a properties file and ignores the "java.util.logging.config.class"
system property. The "java.util.logging.config.class" property is
only used by the
readConfiguration()
method to load a custom configuration class as an initial configuration. - Parameters:
mapper
- a functional interface that takes a configuration key k and returns a function f(o,n) whose returned value will be applied to the resulting configuration. The function f may returnnull
to indicate that the property k will not be added to the resulting configuration.
Ifmapper
isnull
then(k) -> ((o, n) -> n)
is assumed.
For each k, the mapped function f will be invoked with the value associated with k in the old configuration (i.e o) and the value associated with k in the new configuration (i.e. n).
Anull
value for o or n indicates that no value was present for k in the corresponding configuration.- Throws:
SecurityException
- if a security manager exists and if the caller does not have LoggingPermission("control"), or does not have the permissions required to set up the configuration (e.g. open file specified for FileHandlers etc...)NullPointerException
- ifmapper
returns anull
function when invoked.IOException
- if there are problems reading from the logging configuration file.- Since:
- 9
- See Also:
updateConfiguration(java.io.InputStream, java.util.function.Function)
-
updateConfiguration
public void updateConfiguration(InputStream ins, Function<String,BiFunction<String,String,String>> mapper) throws IOExceptionUpdates the logging configuration.For each configuration key in the existing configuration and the given input stream configuration, the given
mapper
function is invoked to map from the configuration key to a function, f(o,n), that takes the old value and new value and returns the resulting value to be applied in the resulting configuration, as specified in the table below.Let k be a configuration key in the old or new configuration, o be the old value (i.e. the value associated with k in the old configuration), n be the new value (i.e. the value associated with k in the new configuration), and f be the function returned by
mapper.apply(
k)
: then v = f(o,n) is the resulting value. If v is notnull
, then a property k with value v will be added to the resulting configuration. Otherwise, it will be omitted.
Anull
value may be passed to function f to indicate that the corresponding configuration has no configuration key k. The function f may returnnull
to indicate that there will be no value associated with k in the resulting configuration.If
mapper
isnull
, then v will be set to n.LogManager properties are updated with the resulting value in the resulting configuration.
The registered configuration listeners will be invoked after the configuration is successfully updated.
Property Resulting Behavior <logger>.level
- If the resulting configuration defines a level for a logger and if the resulting level is different than the level specified in the the old configuration, or not specified in the old configuration, then if the logger exists or if children for that logger exist, the level for that logger will be updated, and the change propagated to any existing logger children. This may cause the logger to be created, if necessary.
- If the old configuration defined a level for a logger, and the
resulting configuration doesn't, then this change will not be
propagated to existing loggers, if any.
To completely replace a configuration - the caller should therefore
call
reset
to empty the current configuration, before callingupdateConfiguration
.
<logger>.useParentHandlers
- If either the resulting or the old value for the useParentHandlers property is not null, then if the logger exists or if children for that logger exist, that logger will be updated to the resulting value. The value of the useParentHandlers property is the value specified in the configuration; if not specified, the default is true.
<logger>.handlers
- If the resulting configuration defines a list of handlers for a logger, and if the resulting list is different than the list specified in the old configuration for that logger (that could be empty), then if the logger exists or its children exist, the handlers associated with that logger are closed and removed and the new handlers will be created per the resulting configuration and added to that logger, creating that logger if necessary.
- If the old configuration defined some handlers for a logger, and the resulting configuration doesn't, if that logger exists, its handlers will be removed and closed.
- Changing the list of handlers on an existing logger will cause all its previous handlers to be removed and closed, regardless of whether they had been created from the configuration or programmatically. The old handlers will be replaced by new handlers, if any.
<handler-name>.*
- Properties configured/changed on handler classes will only affect newly created handlers. If a node is configured with the same list of handlers in the old and the resulting configuration, then these handlers will remain unchanged.
config
and any other property- The resulting value for these property will be stored in the
LogManager properties, but
updateConfiguration
will not parse or process their values.
Example mapper functions:
- Replace all logging properties with the new configuration:
(k) -> ((o, n) -> n)
:
this is equivalent to passing a nullmapper
parameter. - Merge the new configuration and old configuration and use the
new value if k exists in the new configuration:
(k) -> ((o, n) -> n == null ? o : n)
:
as if merging two collections as follows:result.putAll(oldc); result.putAll(newc)
. - Merge the new configuration and old configuration and use the old
value if k exists in the old configuration:
(k) -> ((o, n) -> o == null ? n : o)
:
as if merging two collections as follows:result.putAll(newc); result.putAll(oldc)
. - Replace all properties with the new configuration except the handler
property to configure Logger's handler that is not root logger:
(k) -> k.endsWith(".handlers")
? ((o, n) -> (o == null ? n : o))
: ((o, n) -> n)
To completely reinitialize a configuration, an application can first call
reset
to fully remove the old configuration, followed byupdateConfiguration
to initialize the new configuration.- Parameters:
ins
- a stream to read properties frommapper
- a functional interface that takes a configuration key k and returns a function f(o,n) whose returned value will be applied to the resulting configuration. The function f may returnnull
to indicate that the property k will not be added to the resulting configuration.
Ifmapper
isnull
then(k) -> ((o, n) -> n)
is assumed.
For each k, the mapped function f will be invoked with the value associated with k in the old configuration (i.e o) and the value associated with k in the new configuration (i.e. n).
Anull
value for o or n indicates that no value was present for k in the corresponding configuration.- Throws:
SecurityException
- if a security manager exists and if the caller does not have LoggingPermission("control"), or does not have the permissions required to set up the configuration (e.g. open files specified for FileHandlers)NullPointerException
- ifins
is null or ifmapper
returns a null function when invoked.IOException
- if there are problems reading from the stream, or the given stream is not in the properties file format.- Since:
- 9
-
getProperty
Get the value of a logging property. The method returns null if the property is not found.- Parameters:
name
- property name- Returns:
- property value
-
checkAccess
Check that the current context is trusted to modify the logging configuration. This requires LoggingPermission("control").If the check fails we throw a SecurityException, otherwise we return normally.
- Throws:
SecurityException
- if a security manager exists and if the caller does not have LoggingPermission("control").
-
getLoggingMXBean
Deprecated.java.util.logging.LoggingMXBean
is deprecated and replaced withjava.lang.management.PlatformLoggingMXBean
. UseManagementFactory.getPlatformMXBean
(PlatformLoggingMXBean.class) instead.ReturnsLoggingMXBean
for managing loggers.- Returns:
- a
LoggingMXBean
object. - Since:
- 1.5
- See Also:
PlatformLoggingMXBean
-
addConfigurationListener
Adds a configuration listener to be invoked each time the logging configuration is read. If the listener is already registered the method does nothing.The listener is invoked with privileges that are restricted by the calling context of this method. The order in which the listeners are invoked is unspecified.
It is recommended that listeners do not throw errors or exceptions. If a listener terminates with an uncaught error or exception then the first exception will be propagated to the caller of
readConfiguration()
(orreadConfiguration(java.io.InputStream)
) after all listeners have been invoked.- Implementation Note:
- If more than one listener terminates with an uncaught error or exception, an implementation may record the additional errors or exceptions as suppressed exceptions.
- Parameters:
listener
- A configuration listener that will be invoked after the configuration changed.- Returns:
- This LogManager.
- Throws:
SecurityException
- if a security manager exists and if the caller does not have LoggingPermission("control").NullPointerException
- if the listener is null.- Since:
- 9
-
removeConfigurationListener
Removes a previously registered configuration listener. Returns silently if the listener is not found.- Parameters:
listener
- the configuration listener to remove.- Throws:
NullPointerException
- if the listener is null.SecurityException
- if a security manager exists and if the caller does not have LoggingPermission("control").- Since:
- 9
-
java.util.logging.LoggingMXBean
is deprecated and replaced withjava.lang.management.PlatformLoggingMXBean
.