Module java.desktop

Interface Sequencer

All Superinterfaces:
AutoCloseable, MidiDevice

public interface Sequencer
extends MidiDevice
A hardware or software device that plays back a MIDI sequence is known as a sequencer. A MIDI sequence contains lists of time-stamped MIDI data, such as might be read from a standard MIDI file. Most sequencers also provide functions for creating and editing sequences.

The Sequencer interface includes methods for the following basic MIDI sequencer operations:

  • obtaining a sequence from MIDI file data
  • starting and stopping playback
  • moving to an arbitrary position in the sequence
  • changing the tempo (speed) of playback
  • synchronizing playback to an internal clock or to received MIDI messages
  • controlling the timing of another device
In addition, the following operations are supported, either directly, or indirectly through objects that the Sequencer has access to:
  • editing the data by adding or deleting individual MIDI events or entire tracks
  • muting or soloing individual tracks in the sequence
  • notifying listener objects about any meta-events or control-change events encountered while playing back the sequence
See Also:
Sequencer.SyncMode, addMetaEventListener(javax.sound.midi.MetaEventListener), ControllerEventListener, Receiver, Transmitter, MidiDevice
  • Nested Class Summary

    Nested Classes 
    Modifier and Type Interface Description
    static class  Sequencer.SyncMode
    A SyncMode object represents one of the ways in which a MIDI sequencer's notion of time can be synchronized with a master or slave device.

    Nested classes/interfaces declared in interface javax.sound.midi.MidiDevice

    MidiDevice.Info
  • Field Summary

    Fields 
    Modifier and Type Field Description
    static int LOOP_CONTINUOUSLY
    A value indicating that looping should continue indefinitely rather than complete after a specific number of loops.
  • Method Summary

    Modifier and Type Method Description
    int[] addControllerEventListener​(ControllerEventListener listener, int[] controllers)
    Registers a controller event listener to receive notification whenever the sequencer processes a control-change event of the requested type or types.
    boolean addMetaEventListener​(MetaEventListener listener)
    Registers a meta-event listener to receive notification whenever a meta-event is encountered in the sequence and processed by the sequencer.
    int getLoopCount()
    Obtains the number of repetitions for playback.
    long getLoopEndPoint()
    Obtains the end position of the loop, in MIDI ticks.
    long getLoopStartPoint()
    Obtains the start position of the loop, in MIDI ticks.
    Sequencer.SyncMode getMasterSyncMode()
    Obtains the current master synchronization mode for this sequencer.
    Sequencer.SyncMode[] getMasterSyncModes()
    Obtains the set of master synchronization modes supported by this sequencer.
    long getMicrosecondLength()
    Obtains the length of the current sequence, expressed in microseconds, or 0 if no sequence is set.
    long getMicrosecondPosition()
    Obtains the current position in the sequence, expressed in microseconds.
    Sequence getSequence()
    Obtains the sequence on which the Sequencer is currently operating.
    Sequencer.SyncMode getSlaveSyncMode()
    Obtains the current slave synchronization mode for this sequencer.
    Sequencer.SyncMode[] getSlaveSyncModes()
    Obtains the set of slave synchronization modes supported by the sequencer.
    float getTempoFactor()
    Returns the current tempo factor for the sequencer.
    float getTempoInBPM()
    Obtains the current tempo, expressed in beats per minute.
    float getTempoInMPQ()
    Obtains the current tempo, expressed in microseconds per quarter note.
    long getTickLength()
    Obtains the length of the current sequence, expressed in MIDI ticks, or 0 if no sequence is set.
    long getTickPosition()
    Obtains the current position in the sequence, expressed in MIDI ticks.
    boolean getTrackMute​(int track)
    Obtains the current mute state for a track.
    boolean getTrackSolo​(int track)
    Obtains the current solo state for a track.
    boolean isRecording()
    Indicates whether the Sequencer is currently recording.
    boolean isRunning()
    Indicates whether the Sequencer is currently running.
    void recordDisable​(Track track)
    Disables recording to the specified track.
    void recordEnable​(Track track, int channel)
    Prepares the specified track for recording events received on a particular channel.
    int[] removeControllerEventListener​(ControllerEventListener listener, int[] controllers)
    Removes a controller event listener's interest in one or more types of controller event.
    void removeMetaEventListener​(MetaEventListener listener)
    Removes the specified meta-event listener from this sequencer's list of registered listeners, if in fact the listener is registered.
    void setLoopCount​(int count)
    Sets the number of repetitions of the loop for playback.
    void setLoopEndPoint​(long tick)
    Sets the last MIDI tick that will be played in the loop.
    void setLoopStartPoint​(long tick)
    Sets the first MIDI tick that will be played in the loop.
    void setMasterSyncMode​(Sequencer.SyncMode sync)
    Sets the source of timing information used by this sequencer.
    void setMicrosecondPosition​(long microseconds)
    Sets the current position in the sequence, expressed in microseconds.
    void setSequence​(InputStream stream)
    Sets the current sequence on which the sequencer operates.
    void setSequence​(Sequence sequence)
    Sets the current sequence on which the sequencer operates.
    void setSlaveSyncMode​(Sequencer.SyncMode sync)
    Sets the slave synchronization mode for the sequencer.
    void setTempoFactor​(float factor)
    Scales the sequencer's actual playback tempo by the factor provided.
    void setTempoInBPM​(float bpm)
    Sets the tempo in beats per minute.
    void setTempoInMPQ​(float mpq)
    Sets the tempo in microseconds per quarter note.
    void setTickPosition​(long tick)
    Sets the current sequencer position in MIDI ticks.
    void setTrackMute​(int track, boolean mute)
    Sets the mute state for a track.
    void setTrackSolo​(int track, boolean solo)
    Sets the solo state for a track.
    void start()
    Starts playback of the MIDI data in the currently loaded sequence.
    void startRecording()
    Starts recording and playback of MIDI data.
    void stop()
    Stops recording, if active, and playback of the currently loaded sequence, if any.
    void stopRecording()
    Stops recording, if active.
  • Field Details

  • Method Details

    • setSequence

      void setSequence​(Sequence sequence) throws InvalidMidiDataException
      Sets the current sequence on which the sequencer operates.

      This method can be called even if the Sequencer is closed.

      Parameters:
      sequence - the sequence to be loaded
      Throws:
      InvalidMidiDataException - if the sequence contains invalid MIDI data, or is not supported
    • setSequence

      void setSequence​(InputStream stream) throws IOException, InvalidMidiDataException
      Sets the current sequence on which the sequencer operates. The stream must point to MIDI file data.

      This method can be called even if the Sequencer is closed.

      Parameters:
      stream - stream containing MIDI file data
      Throws:
      IOException - if an I/O exception occurs during reading of the stream
      InvalidMidiDataException - if invalid data is encountered in the stream, or the stream is not supported
    • getSequence

      Sequence getSequence()
      Obtains the sequence on which the Sequencer is currently operating.

      This method can be called even if the Sequencer is closed.

      Returns:
      the current sequence, or null if no sequence is currently set
    • start

      void start()
      Starts playback of the MIDI data in the currently loaded sequence. Playback will begin from the current position. If the playback position reaches the loop end point, and the loop count is greater than 0, playback will resume at the loop start point for the number of repetitions set with setLoopCount. After that, or if the loop count is 0, playback will continue to play to the end of the sequence.

      The implementation ensures that the synthesizer is brought to a consistent state when jumping to the loop start point by sending appropriate controllers, pitch bend, and program change events.

      Throws:
      IllegalStateException - if the Sequencer is closed
      See Also:
      setLoopStartPoint(long), setLoopEndPoint(long), setLoopCount(int), stop()
    • stop

      void stop()
      Stops recording, if active, and playback of the currently loaded sequence, if any.
      Throws:
      IllegalStateException - if the Sequencer is closed
      See Also:
      start(), isRunning()
    • isRunning

      boolean isRunning()
      Indicates whether the Sequencer is currently running. The default is false. The Sequencer starts running when eitherstart() or startRecording() is called. isRunning then returns true until playback of the sequence completes or stop() is called.
      Returns:
      true if the Sequencer is running, otherwise false
    • startRecording

      void startRecording()
      Starts recording and playback of MIDI data. Data is recorded to all enabled tracks, on the channel(s) for which they were enabled. Recording begins at the current position of the sequencer. Any events already in the track are overwritten for the duration of the recording session. Events from the currently loaded sequence, if any, are delivered to the sequencer's transmitter(s) along with messages received during recording.

      Note that tracks are not by default enabled for recording. In order to record MIDI data, at least one track must be specifically enabled for recording.

      Throws:
      IllegalStateException - if the Sequencer is closed
      See Also:
      recordEnable(javax.sound.midi.Track, int), recordDisable(javax.sound.midi.Track)
    • stopRecording

      void stopRecording()
      Stops recording, if active. Playback of the current sequence continues.
      Throws:
      IllegalStateException - if the Sequencer is closed
      See Also:
      startRecording(), isRecording()
    • isRecording

      boolean isRecording()
      Indicates whether the Sequencer is currently recording. The default is false. The Sequencer begins recording when startRecording() is called, and then returns true until stop() or stopRecording() is called.
      Returns:
      true if the Sequencer is recording, otherwise false
    • recordEnable

      void recordEnable​(Track track, int channel)
      Prepares the specified track for recording events received on a particular channel. Once enabled, a track will receive events when recording is active.
      Parameters:
      track - the track to which events will be recorded
      channel - the channel on which events will be received. If -1 is specified for the channel value, the track will receive data from all channels.
      Throws:
      IllegalArgumentException - thrown if the track is not part of the current sequence
    • recordDisable

      void recordDisable​(Track track)
      Disables recording to the specified track. Events will no longer be recorded into this track.
      Parameters:
      track - the track to disable for recording, or null to disable recording for all tracks
    • getTempoInBPM

      float getTempoInBPM()
      Obtains the current tempo, expressed in beats per minute. The actual tempo of playback is the product of the returned value and the tempo factor.
      Returns:
      the current tempo in beats per minute
      See Also:
      getTempoFactor(), setTempoInBPM(float), getTempoInMPQ()
    • setTempoInBPM

      void setTempoInBPM​(float bpm)
      Sets the tempo in beats per minute. The actual tempo of playback is the product of the specified value and the tempo factor.
      Parameters:
      bpm - desired new tempo in beats per minute
      See Also:
      getTempoFactor(), setTempoInMPQ(float), getTempoInBPM()
    • getTempoInMPQ

      float getTempoInMPQ()
      Obtains the current tempo, expressed in microseconds per quarter note. The actual tempo of playback is the product of the returned value and the tempo factor.
      Returns:
      the current tempo in microseconds per quarter note
      See Also:
      getTempoFactor(), setTempoInMPQ(float), getTempoInBPM()
    • setTempoInMPQ

      void setTempoInMPQ​(float mpq)
      Sets the tempo in microseconds per quarter note. The actual tempo of playback is the product of the specified value and the tempo factor.
      Parameters:
      mpq - desired new tempo in microseconds per quarter note
      See Also:
      getTempoFactor(), setTempoInBPM(float), getTempoInMPQ()
    • setTempoFactor

      void setTempoFactor​(float factor)
      Scales the sequencer's actual playback tempo by the factor provided. The default is 1.0. A value of 1.0 represents the natural rate (the tempo specified in the sequence), 2.0 means twice as fast, etc. The tempo factor does not affect the values returned by getTempoInMPQ() and getTempoInBPM(). Those values indicate the tempo prior to scaling.

      Note that the tempo factor cannot be adjusted when external synchronization is used. In that situation, setTempoFactor always sets the tempo factor to 1.0.

      Parameters:
      factor - the requested tempo scalar
      See Also:
      getTempoFactor()
    • getTempoFactor

      float getTempoFactor()
      Returns the current tempo factor for the sequencer. The default is 1.0.
      Returns:
      tempo factor
      See Also:
      setTempoFactor(float)
    • getTickLength

      long getTickLength()
      Obtains the length of the current sequence, expressed in MIDI ticks, or 0 if no sequence is set.
      Returns:
      length of the sequence in ticks
    • getTickPosition

      long getTickPosition()
      Obtains the current position in the sequence, expressed in MIDI ticks. (The duration of a tick in seconds is determined both by the tempo and by the timing resolution stored in the Sequence.)
      Returns:
      current tick
      See Also:
      setTickPosition(long)
    • setTickPosition

      void setTickPosition​(long tick)
      Sets the current sequencer position in MIDI ticks.
      Parameters:
      tick - the desired tick position
      See Also:
      getTickPosition()
    • getMicrosecondLength

      long getMicrosecondLength()
      Obtains the length of the current sequence, expressed in microseconds, or 0 if no sequence is set.
      Returns:
      length of the sequence in microseconds
    • getMicrosecondPosition

      long getMicrosecondPosition()
      Obtains the current position in the sequence, expressed in microseconds.
      Specified by:
      getMicrosecondPosition in interface MidiDevice
      Returns:
      the current position in microseconds
      See Also:
      setMicrosecondPosition(long)
    • setMicrosecondPosition

      void setMicrosecondPosition​(long microseconds)
      Sets the current position in the sequence, expressed in microseconds.
      Parameters:
      microseconds - desired position in microseconds
      See Also:
      getMicrosecondPosition()
    • setMasterSyncMode

      void setMasterSyncMode​(Sequencer.SyncMode sync)
      Sets the source of timing information used by this sequencer. The sequencer synchronizes to the master, which is the internal clock, MIDI clock, or MIDI time code, depending on the value of sync. The sync argument must be one of the supported modes, as returned by getMasterSyncModes().
      Parameters:
      sync - the desired master synchronization mode
      See Also:
      Sequencer.SyncMode.INTERNAL_CLOCK, Sequencer.SyncMode.MIDI_SYNC, Sequencer.SyncMode.MIDI_TIME_CODE, getMasterSyncMode()
    • getMasterSyncMode

      Sequencer.SyncMode getMasterSyncMode()
      Obtains the current master synchronization mode for this sequencer.
      Returns:
      the current master synchronization mode
      See Also:
      setMasterSyncMode(SyncMode), getMasterSyncModes()
    • getMasterSyncModes

      Sequencer.SyncMode[] getMasterSyncModes()
      Obtains the set of master synchronization modes supported by this sequencer.
      Returns:
      the available master synchronization modes
      See Also:
      Sequencer.SyncMode.INTERNAL_CLOCK, Sequencer.SyncMode.MIDI_SYNC, Sequencer.SyncMode.MIDI_TIME_CODE, getMasterSyncMode(), setMasterSyncMode(SyncMode)
    • setSlaveSyncMode

      void setSlaveSyncMode​(Sequencer.SyncMode sync)
      Sets the slave synchronization mode for the sequencer. This indicates the type of timing information sent by the sequencer to its receiver. The sync argument must be one of the supported modes, as returned by getSlaveSyncModes().
      Parameters:
      sync - the desired slave synchronization mode
      See Also:
      Sequencer.SyncMode.MIDI_SYNC, Sequencer.SyncMode.MIDI_TIME_CODE, Sequencer.SyncMode.NO_SYNC, getSlaveSyncModes()
    • getSlaveSyncMode

      Sequencer.SyncMode getSlaveSyncMode()
      Obtains the current slave synchronization mode for this sequencer.
      Returns:
      the current slave synchronization mode
      See Also:
      setSlaveSyncMode(SyncMode), getSlaveSyncModes()
    • getSlaveSyncModes

      Sequencer.SyncMode[] getSlaveSyncModes()
      Obtains the set of slave synchronization modes supported by the sequencer.
      Returns:
      the available slave synchronization modes
      See Also:
      Sequencer.SyncMode.MIDI_SYNC, Sequencer.SyncMode.MIDI_TIME_CODE, Sequencer.SyncMode.NO_SYNC
    • setTrackMute

      void setTrackMute​(int track, boolean mute)
      Sets the mute state for a track. This method may fail for a number of reasons. For example, the track number specified may not be valid for the current sequence, or the sequencer may not support this functionality. An application which needs to verify whether this operation succeeded should follow this call with a call to getTrackMute(int).
      Parameters:
      track - the track number. Tracks in the current sequence are numbered from 0 to the number of tracks in the sequence minus 1.
      mute - the new mute state for the track. true implies the track should be muted, false implies the track should be unmuted.
      See Also:
      getSequence()
    • getTrackMute

      boolean getTrackMute​(int track)
      Obtains the current mute state for a track. The default mute state for all tracks which have not been muted is false. In any case where the specified track has not been muted, this method should return false. This applies if the sequencer does not support muting of tracks, and if the specified track index is not valid.
      Parameters:
      track - the track number. Tracks in the current sequence are numbered from 0 to the number of tracks in the sequence minus 1.
      Returns:
      true if muted, false if not
    • setTrackSolo

      void setTrackSolo​(int track, boolean solo)
      Sets the solo state for a track. If solo is true only this track and other solo'd tracks will sound. If solo is false then only other solo'd tracks will sound, unless no tracks are solo'd in which case all un-muted tracks will sound.

      This method may fail for a number of reasons. For example, the track number specified may not be valid for the current sequence, or the sequencer may not support this functionality. An application which needs to verify whether this operation succeeded should follow this call with a call to getTrackSolo(int).

      Parameters:
      track - the track number. Tracks in the current sequence are numbered from 0 to the number of tracks in the sequence minus 1.
      solo - the new solo state for the track. true implies the track should be solo'd, false implies the track should not be solo'd.
      See Also:
      getSequence()
    • getTrackSolo

      boolean getTrackSolo​(int track)
      Obtains the current solo state for a track. The default mute state for all tracks which have not been solo'd is false. In any case where the specified track has not been solo'd, this method should return false. This applies if the sequencer does not support soloing of tracks, and if the specified track index is not valid.
      Parameters:
      track - the track number. Tracks in the current sequence are numbered from 0 to the number of tracks in the sequence minus 1.
      Returns:
      true if solo'd, false if not
    • addMetaEventListener

      boolean addMetaEventListener​(MetaEventListener listener)
      Registers a meta-event listener to receive notification whenever a meta-event is encountered in the sequence and processed by the sequencer. This method can fail if, for instance,this class of sequencer does not support meta-event notification.
      Parameters:
      listener - listener to add
      Returns:
      true if the listener was successfully added, otherwise false
      See Also:
      removeMetaEventListener(javax.sound.midi.MetaEventListener), MetaEventListener, MetaMessage
    • removeMetaEventListener

      void removeMetaEventListener​(MetaEventListener listener)
      Removes the specified meta-event listener from this sequencer's list of registered listeners, if in fact the listener is registered.
      Parameters:
      listener - the meta-event listener to remove
      See Also:
      addMetaEventListener(javax.sound.midi.MetaEventListener)
    • addControllerEventListener

      int[] addControllerEventListener​(ControllerEventListener listener, int[] controllers)
      Registers a controller event listener to receive notification whenever the sequencer processes a control-change event of the requested type or types. The types are specified by the controllers argument, which should contain an array of MIDI controller numbers. (Each number should be between 0 and 127, inclusive. See the MIDI 1.0 Specification for the numbers that correspond to various types of controllers.)

      The returned array contains the MIDI controller numbers for which the listener will now receive events. Some sequencers might not support controller event notification, in which case the array has a length of 0. Other sequencers might support notification for some controllers but not all. This method may be invoked repeatedly. Each time, the returned array indicates all the controllers that the listener will be notified about, not only the controllers requested in that particular invocation.

      Parameters:
      listener - the controller event listener to add to the list of registered listeners
      controllers - the MIDI controller numbers for which change notification is requested
      Returns:
      the numbers of all the MIDI controllers whose changes will now be reported to the specified listener
      See Also:
      removeControllerEventListener(javax.sound.midi.ControllerEventListener, int[]), ControllerEventListener
    • removeControllerEventListener

      int[] removeControllerEventListener​(ControllerEventListener listener, int[] controllers)
      Removes a controller event listener's interest in one or more types of controller event. The controllers argument is an array of MIDI numbers corresponding to the controllers for which the listener should no longer receive change notifications. To completely remove this listener from the list of registered listeners, pass in null for controllers. The returned array contains the MIDI controller numbers for which the listener will now receive events. The array has a length of 0 if the listener will not receive change notifications for any controllers.
      Parameters:
      listener - old listener
      controllers - the MIDI controller numbers for which change notification should be cancelled, or null to cancel for all controllers
      Returns:
      the numbers of all the MIDI controllers whose changes will now be reported to the specified listener
      See Also:
      addControllerEventListener(javax.sound.midi.ControllerEventListener, int[])
    • setLoopStartPoint

      void setLoopStartPoint​(long tick)
      Sets the first MIDI tick that will be played in the loop. If the loop count is greater than 0, playback will jump to this point when reaching the loop end point.

      A value of 0 for the starting point means the beginning of the loaded sequence. The starting point must be lower than or equal to the ending point, and it must fall within the size of the loaded sequence.

      A sequencer's loop start point defaults to start of the sequence.

      Parameters:
      tick - the loop's starting position, in MIDI ticks (zero-based)
      Throws:
      IllegalArgumentException - if the requested loop start point cannot be set, usually because it falls outside the sequence's duration or because the start point is after the end point
      Since:
      1.5
      See Also:
      setLoopEndPoint(long), setLoopCount(int), getLoopStartPoint(), start()
    • getLoopStartPoint

      long getLoopStartPoint()
      Obtains the start position of the loop, in MIDI ticks.
      Returns:
      the start position of the loop, in MIDI ticks (zero-based)
      Since:
      1.5
      See Also:
      setLoopStartPoint(long)
    • setLoopEndPoint

      void setLoopEndPoint​(long tick)
      Sets the last MIDI tick that will be played in the loop. If the loop count is 0, the loop end point has no effect and playback continues to play when reaching the loop end point.

      A value of -1 for the ending point indicates the last tick of the sequence. Otherwise, the ending point must be greater than or equal to the starting point, and it must fall within the size of the loaded sequence.

      A sequencer's loop end point defaults to -1, meaning the end of the sequence.

      Parameters:
      tick - the loop's ending position, in MIDI ticks (zero-based), or -1 to indicate the final tick
      Throws:
      IllegalArgumentException - if the requested loop point cannot be set, usually because it falls outside the sequence's duration or because the ending point is before the starting point
      Since:
      1.5
      See Also:
      setLoopStartPoint(long), setLoopCount(int), getLoopEndPoint(), start()
    • getLoopEndPoint

      long getLoopEndPoint()
      Obtains the end position of the loop, in MIDI ticks.
      Returns:
      the end position of the loop, in MIDI ticks (zero-based), or -1 to indicate the end of the sequence
      Since:
      1.5
      See Also:
      setLoopEndPoint(long)
    • setLoopCount

      void setLoopCount​(int count)
      Sets the number of repetitions of the loop for playback. When the playback position reaches the loop end point, it will loop back to the loop start point count times, after which playback will continue to play to the end of the sequence.

      If the current position when this method is invoked is greater than the loop end point, playback continues to the end of the sequence without looping, unless the loop end point is changed subsequently.

      A count value of 0 disables looping: playback will continue at the loop end point, and it will not loop back to the loop start point. This is a sequencer's default.

      If playback is stopped during looping, the current loop status is cleared; subsequent start requests are not affected by an interrupted loop operation.

      Parameters:
      count - the number of times playback should loop back from the loop's end position to the loop's start position, or LOOP_CONTINUOUSLY to indicate that looping should continue until interrupted
      Throws:
      IllegalArgumentException - if count is negative and not equal to LOOP_CONTINUOUSLY
      Since:
      1.5
      See Also:
      setLoopStartPoint(long), setLoopEndPoint(long), getLoopCount(), start()
    • getLoopCount

      int getLoopCount()
      Obtains the number of repetitions for playback.
      Returns:
      the number of loops after which playback plays to the end of the sequence
      Since:
      1.5
      See Also:
      setLoopCount(int), start()