DecimalFormat
is a concrete subclass of
NumberFormat
that formats decimal numbers. It has a variety of features designed to make it possible to parse and format numbers in any locale, including support for Western, Arabic, and Indic digits. It also supports different kinds of numbers, including integers (123), fixed-point numbers (123.4), scientific notation (1.23E4), percentages (12%), and currency amounts ($123). All of these can be localized.
To obtain a NumberFormat
for a specific locale, including the default locale, call one of NumberFormat
's factory methods, such as getInstance()
. In general, do not call the DecimalFormat
constructors directly, since the NumberFormat
factory methods may return subclasses other than DecimalFormat
. If you need to customize the format object, do something like this:
NumberFormat f = NumberFormat.getInstance(loc);
if (f instanceof DecimalFormat) {
((DecimalFormat) f).setDecimalSeparatorAlwaysShown(true);
}
A DecimalFormat
comprises a pattern and a set of symbols. The pattern may be set directly using applyPattern()
, or indirectly using the API methods. The symbols are stored in a DecimalFormatSymbols
object. When using the NumberFormat
factory methods, the pattern and symbols are read from localized ResourceBundle
s.
Patterns
DecimalFormat
patterns have the following syntax:
Pattern:
PositivePattern
PositivePattern ; NegativePattern
PositivePattern:
Prefixopt Number Suffixopt
NegativePattern:
Prefixopt Number Suffixopt
Prefix:
any Unicode characters except \uFFFE, \uFFFF, and special characters
Suffix:
any Unicode characters except \uFFFE, \uFFFF, and special characters
Number:
Integer Exponentopt
Integer . Fraction Exponentopt
Integer:
MinimumInteger
#
# Integer
# , Integer
MinimumInteger:
0
0 MinimumInteger
0 , MinimumInteger
Fraction:
MinimumFractionopt OptionalFractionopt
MinimumFraction:
0 MinimumFractionopt
OptionalFraction:
# OptionalFractionopt
Exponent:
E MinimumExponent
MinimumExponent:
0 MinimumExponentopt
A DecimalFormat
pattern contains a positive and negative subpattern, for example, "#,##0.00;(#,##0.00)"
. Each subpattern has a prefix, numeric part, and suffix. The negative subpattern is optional; if absent, then the positive subpattern prefixed with the localized minus sign ('-'
in most locales) is used as the negative subpattern. That is, "0.00"
alone is equivalent to "0.00;-0.00"
. If there is an explicit negative subpattern, it serves only to specify the negative prefix and suffix; the number of digits, minimal digits, and other characteristics are all the same as the positive pattern. That means that "#,##0.0#;(#)"
produces precisely the same behavior as "#,##0.0#;(#,##0.0#)"
.
The prefixes, suffixes, and various symbols used for infinity, digits, thousands separators, decimal separators, etc. may be set to arbitrary values, and they will appear properly during formatting. However, care must be taken that the symbols and strings do not conflict, or parsing will be unreliable. For example, either the positive and negative prefixes or the suffixes must be distinct for DecimalFormat.parse()
to be able to distinguish positive from negative values. (If they are identical, then DecimalFormat
will behave as if no negative subpattern was specified.) Another example is that the decimal separator and thousands separator should be distinct characters, or parsing will be impossible.
The grouping separator is commonly used for thousands, but in some countries it separates ten-thousands. The grouping size is a constant number of digits between the grouping characters, such as 3 for 100,000,000 or 4 for 1,0000,0000. If you supply a pattern with multiple grouping characters, the interval between the last one and the end of the integer is the one that is used. So "#,##,###,####"
== "######,####"
== "##,####,####"
.
Many characters in a pattern are taken literally; they are matched during parsing and output unchanged during formatting. Special characters, on the other hand, stand for other characters, strings, or classes of characters. They must be quoted, unless noted otherwise, if they are to appear in the prefix or suffix as literals.
The characters listed here are used in non-localized patterns. Localized patterns use the corresponding characters taken from this formatter's DecimalFormatSymbols
object instead, and these characters lose their special status. Two exceptions are the currency sign and quote, which are not localized.
Chart showing symbol, location, localized, and meaning.
Symbol | Location | Localized? | Meaning |
0 | Number | Yes | Digit |
# | Number | Yes | Digit, zero shows as absent |
. | Number | Yes | Decimal separator or monetary decimal separator |
- | Number | Yes | Minus sign |
, | Number | Yes | Grouping separator |
E | Number | Yes | Separates mantissa and exponent in scientific notation. Need not be quoted in prefix or suffix. |
; | Subpattern boundary | Yes | Separates positive and negative subpatterns |
% | Prefix or suffix | Yes | Multiply by 100 and show as percentage |
\u2030 | Prefix or suffix | Yes | Multiply by 1000 and show as per mille value |
¤ (\u00A4 ) | Prefix or suffix | No | Currency sign, replaced by currency symbol. If doubled, replaced by international currency symbol. If present in a pattern, the monetary decimal separator is used instead of the decimal separator. |
' | Prefix or suffix | No | Used to quote special characters in a prefix or suffix, for example, "'#'#" formats 123 to "#123" . To create a single quote itself, use two in a row: "# o''clock" . |
Scientific Notation
Numbers in scientific notation are expressed as the product of a mantissa and a power of ten, for example, 1234 can be expressed as 1.234 x 10^3. The mantissa is often in the range 1.0 ≤ x < 10.0, but it need not be. DecimalFormat
can be instructed to format and parse scientific notation only via a pattern ; there is currently no factory method that creates a scientific notation format. In a pattern, the exponent character immediately followed by one or more digit characters indicates scientific notation. Example: "0.###E0"
formats the number 1234 as "1.234E3"
.
- The number of digit characters after the exponent character gives the minimum exponent digit count. There is no maximum. Negative exponents are formatted using the localized minus sign, not the prefix and suffix from the pattern. This allows patterns such as
"0.###E0 m/s"
.
- The minimum and maximum number of integer digits are interpreted together:
- If the maximum number of integer digits is greater than their minimum number and greater than 1, it forces the exponent to be a multiple of the maximum number of integer digits, and the minimum number of integer digits to be interpreted as 1. The most common use of this is to generate engineering notation , in which the exponent is a multiple of three, e.g.,
"##0.#####E0"
. Using this pattern, the number 12345 formats to "12.345E3"
, and 123456 formats to "123.456E3"
.
- Otherwise, the minimum number of integer digits is achieved by adjusting the exponent. Example: 0.00123 formatted with
"00.###E0"
yields "12.3E-4"
.
- The number of significant digits in the mantissa is the sum of the minimum integer and maximum fraction digits, and is unaffected by the maximum integer digits. For example, 12345 formatted with
"##0.##E0"
is "12.3E3"
. To show all digits, set the significant digits count to zero. The number of significant digits does not affect parsing.
- Exponential patterns may not contain grouping separators.
Rounding
DecimalFormat
provides rounding modes defined in
RoundingMode
for formatting. By default, it uses
RoundingMode.HALF_EVEN
.
Digits
For formatting,
DecimalFormat
uses the ten consecutive characters starting with the localized zero digit defined in the
DecimalFormatSymbols
object as digits. For parsing, these digits as well as all Unicode decimal digits, as defined by
Character.digit
, are recognized.
Special Values
NaN
is formatted as a string, which typically has a single character \uFFFD
. This string is determined by the DecimalFormatSymbols
object. This is the only value for which the prefixes and suffixes are not used.
Infinity is formatted as a string, which typically has a single character \u221E
, with the positive or negative prefixes and suffixes applied. The infinity string is determined by the DecimalFormatSymbols
object.
Negative zero ("-0"
) parses to
-
BigDecimal(0)
if isParseBigDecimal()
is true,
-
Long(0)
if isParseBigDecimal()
is false and isParseIntegerOnly()
is true,
-
Double(-0.0)
if both isParseBigDecimal()
and isParseIntegerOnly()
are false.
Decimal formats are generally not synchronized. It is recommended to create separate format instances for each thread. If multiple threads access a format concurrently, it must be synchronized externally.
Example
<strong>// Print out a number using the localized number, integer, currency,
// and percent format for each locale</strong>
Locale[] locales = NumberFormat.getAvailableLocales();
double myNumber = -1234.56;
NumberFormat form;
for (int j = 0; j < 4; ++j) {
System.out.println("FORMAT");
for (int i = 0; i < locales.length; ++i) {
if (locales[i].getCountry().length() == 0) {
continue; // Skip language-only locales
}
System.out.print(locales[i].getDisplayName());
switch (j) {
case 0:
form = NumberFormat.getInstance(locales[i]); break;
case 1:
form = NumberFormat.getIntegerInstance(locales[i]); break;
case 2:
form = NumberFormat.getCurrencyInstance(locales[i]); break;
default:
form = NumberFormat.getPercentInstance(locales[i]); break;
}
if (form instanceof DecimalFormat) {
System.out.print(": " + ((DecimalFormat) form).toPattern());
}
System.out.print(" -> " + form.format(myNumber));
try {
System.out.println(" -> " + form.parse(form.format(myNumber)));
} catch (ParseException e) {}
}
}